Sony VAIO PCV-1156 Hardware Manual Download Page 49 | Manualshive

Page: 49 / 66

background image

48

Connecting peripheral devices

Hardware Guide

Troubleshooting i.LINK devices

If you have problems with your i.LINK device, check the printed

Troubleshooting Guide

, the documentation delivered with the

device, and the VAIO-Link website (

www.vaio-link.com

Connecting an S/PDIF device

The S/PDIF (Sony/Philips Digital Interface) port on your computer allows you to transfer audio files to optical devices. The advantage
is that is does not use the conversion to and from an analog format, which could degrade the signal quality.

Please read the documentation provided with your optical device for connection information.

Connecting a microphone

Your VAIO desktop does not contain an internal microphone. If you need to use a sound input device, for example to chat on the
Internet, you need to plug in an external microphone.

To connect an external microphone, plug the microphone cable into the microphone connector identified by the symbol

. You can

find a microphone connector on the front as well as the back of your PC.

✍

Make sure your microphone is designed for computer use.

«
...
47
48
49
50
51
...
»

Summary of Contents for VAIO PCV-1156



































































Reviews:

No comments

Related manuals for VAIO PCV-1156

Toughbook CF-28 Series

Brand: Panasonic Pages: 12

Brand: Raven Pages: 71

Brand: Wyse Pages: 114

Brand: UMAX Technologies Pages: 40

PC 300GL Type 6561

Brand: IBM Pages: 66

Matrix MXC-4000 Series

Brand: ADLINK Technology Pages: 80

Brand: Vivo Pages: 8

Brand: Toshiba Pages: 217

Satellite A100 Series

Brand: Toshiba Pages: 294

Satellite A300 Series

Brand: Toshiba Pages: 263

Satellite A20 Series

Brand: Toshiba Pages: 495

Satellite 1400 Series

Brand: Toshiba Pages: 528

Brand: G-Wiz Pages: 50

Brand: AOpen Pages: 22

Brand: Tecra Pages: 218

Brand: Advantech Pages: 52

Brand: Advantech Pages: 55

Brand: Advantech Pages: 78

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands