Sony VAIO PCG-Z600NE User Manual Download Page 38

Page: 38 / 114

Using Your Notebook Computer

Using the Floppy Disk Drive

Sony

Not

book

Com

Gui

Using the Floppy Disk Drive

You can connect the floppy disk drive to the USB connector on your computer:

To connect the floppy disk drive

Plug the USB cable into the USB connector. The VAIO logo on the disk drive should
be facing up.

To insert a diskette

Hold the diskette with the label side facing up.

Gently push the diskette into the drive until it clicks into place.

The supplied floppy disk drive
should be used only with this
computer. You can not use this
floppy disk drive with another
computer.

You do not need to shut down
the computer before
connecting or disconnecting
an USB peripheral.

To use another USB device,
such as a USB mouse, at the
same time, plug it into the
(mini USB) connector on the
computer by using the
supplied conversion adapter.

To USB

Floppy disk drive
(supplied)

Summary of Contents for VAIO PCG-Z600NE



















































































































Search results

Summary of Contents for VAIO PCG-Z600NE

Reviews:

Related manuals for VAIO PCG-Z600NE

Brands by name

Popular brands

Sony VAIO PCG-Z600NE, User Manual

Search results

Summary of Contents for VAIO PCG-Z600NE

Reviews:

Related manuals for VAIO PCG-Z600NE

Brands by name

Popular brands