Sony VAIO PCG-X18 User Manual Download Page 77

Page: 77 / 138

Sony

Not

book

Com

Gui

Connecting peripheral devices

Printer

You can connect the printer to your computer using the printer cable and the supplied
floppy disk drive cable to print documents.

Before using the printer

You need to install the driver software supplied with the printer.

To connect a printer

Plug the floppy disk drive cable to the docking/FDD connector on your computer.
Then connect the printer cable (supplied with the printer) to the PRINTER connector
of the floppy disk drive cable.

Before you connect
peripherals, turn off the
computer and all peripherals.

Connect the power cord only
after connecting all cables.

Turn on the computer only
after turning on all peripherals.

You can connect a printer
while the floppy disk drive is in
use.

When using a USB printer,
connect it to the USB
connector of your computer or
of the mini docking station.

If you are using a printer that
does not support Windows 98,
it may not function properly.

When using a USB printer,
connect it to the USB
connector of your computer or
of the mini docking station.

To docking /
FDD connector

Printer

Printer cable (optional or
supplied with the printer)

Floppy disk drive connecting cable

Power cord

Summary of Contents for VAIO PCG-X18











































































































































Search results

Summary of Contents for VAIO PCG-X18

Reviews:

Brands by name

Popular brands

Sony VAIO PCG-X18, User Manual

Search results

Summary of Contents for VAIO PCG-X18

Reviews:

Brands by name

Popular brands