Power Management commands
PowerPanel also provides power management commands that you can use to activate specific power management
functions and to control power for a specific device. You can use these commands to override a profile setting or initiate an
immediate action.
Icon
Description
Standby
Puts the system into Standby mode, a power management state that saves the state of the system and peripheral devices
in memory (RAM). Power consumption reduces to a minimum, and the system remains on. To return the system to the active
state, press any key on your computer. Your notebook is preset to enter Standby mode after 25 minutes.
Hibernate
Provides for the lowest level of power consumption. The system writes the state of the system and peripheral devices to
the hard disk and turns off the system power. To return the system to the original state, use the power button to turn on
power. The system saves the data in the Save to Disk Partition on the hard drive.
Page 106
