Sony Vaio PCG-GRX416SP User Manual Download

Page: 86 / 113

Sony Not

book Us

Getting help

If you are using an optional Sony USB mouse, check that the appropriate driver and software are
properly installed.

Check that the USB mouse is plugged into the USB connector.

About the display

My LCD does not display anything

Check that the computer and display are both plugged into a power source and that they are turned on.

Check that the power indicator on the front panel of the computer is on.

Check that the battery packs are inserted properly and that they are charged.

Adjust the brightness of the LCD.

The computer may be in LCD (video) standby mode. Press any key to activate the display.

The display mode may be set to external display mode. Press and hold the

<Fn>

key while pressing

<F7>

several times.

The screen image on my external display is not centered or sized properly

Use the controls on your external display to adjust the image.

The window I have just closed continues to appear on my LCD

Press the

<Windows

key and

<D>

key twice to refresh the screen.

I cannot switch from LCD display to TV and vice versa

If a DVD disc is inserted in the DVD-ROM drive, remove the disc.

Summary of Contents for Vaio PCG-GRX416SP


















































































































Search results

Summary of Contents for Vaio PCG-GRX416SP

Reviews:

Related manuals for Vaio PCG-GRX416SP

Brands by name

Popular brands

Sony Vaio PCG-GRX416SP, User Manual

Search results

Summary of Contents for Vaio PCG-GRX416SP

Reviews:

Related manuals for Vaio PCG-GRX416SP

Brands by name

Popular brands