4-1
Confidential
PCG-FXA53/
FXA59
(AM)
CHAPTER 4.
OTHERS
4-1. Replacing the CPU
1. Removing the CPU
(END)
5
Remove the special tool.
6
The CPU can be removed upward.
1
1
Install the special tool in the CPU.
2
Insert a flat head (-) screwdriver tip into the
groove as shown.
3
While holding the special tool, slant the
screwdriver in the direction of the arrow.
4
The base under the CPU moves slightly in
the direction of the arrow and the CPU lock
is released.
NOTE :
• Do not use screwdrivers having a large tip than the width of the groove.
Otherwise, it may cause the groove to be damaged.
• When installing the special tool in the CPU, align the convex of the base.
6
3
5
1
1
Insert all pins of the replacement CPU into the
holes of the base and push the CPU in the
direction of the arrow.
2
Install the special tool in the CPU.
NOTE :
Attach the CPU while
aligning the cut-out with
this position.
3
3
Insert a flat head (-) screwdriver tip into the
groove as shown.
While holding the special tool, slant the
screwdriver it in the direction of the arrow.
4
The base under the CPU moves slightly in
the direction of the arrow and the CPU is locked.
5
Remove the special tool.
5
2
2
4
4
2. Installing the CPU
J-2507-309-1
JIG FOR COU
Fig.
Part No.
Description
