Sony VAIO PCG-F701 User Manual Download Page 30

Page: 30 / 122

Using Your Notebook Computer

Using the Keyboard

Sony

Not

book

Com

Gui

Indicators

Indicator

Functions

Power

Power on: lights green.
System Idle mode: lights amber.
System suspend mode: flashes amber.

Battery 1

Indicates the status of the battery inserted in the battery bay on the
left side of the computer.

Indicates the status of the battery inserted in the multi-purpose bay
on the right side of the computer.

Hard disk

Lights when data is read from or written to the hard drive. Do not
enter System Suspend mode or turn off the computer when this
indicator light is on.

Light

Off

Hard disk

Data is read from or written
to the hard drive.
Do not enter System
Suspend mode or turn off
the computer when this
indicator light is on.

The hard drive is not being
accessed.

Num Lock

Turns on when the number
keys area in the numeric
keypad are active.

Turns off when the
alphanumeric character keys
in the keypad area are active.

Summary of Contents for VAIO PCG-F701



























































































































Search results

Summary of Contents for VAIO PCG-F701

Reviews:

Related manuals for VAIO PCG-F701

Brands by name

Popular brands

Sony VAIO PCG-F701, User Manual

Search results

Summary of Contents for VAIO PCG-F701

Reviews:

Related manuals for VAIO PCG-F701

Brands by name

Popular brands