Sony VAIO Fit 14E SVF1421, User Manual, Page: 215 / 450

User Guide
How to Use
Windows 8: The Basics
Parts Description
Setup
Network / Internet
Connections
Settings
Playback
Backup / Recovery
Security
Other Operations
Notifications
Troubleshooting
List of Topics
Print
Personal Computer
VAIO Fit 14E/15E
SVF1421/SVF1521
Using Sleep Mode
In Sleep mode, you can step away from your VAIO computer while retaining the
computer’s state including data you are working on.
To activate Sleep mode
1. Open the charms and select the Settings charm. (See Opening the Charms
to open the charms.)
2. Select Power and Sleep .
If your VAIO computer is equipped with the power indicator, it turns off when
the computer enters Sleep mode (with the default setting).
To return to Normal mode
1. Press the (Power) button.
Note
If you press and hold down the (Power) button for more than four seconds, your
VAIO computer will turn off automatically. Doing this will erase all unsaved data.
By default, your VAIO computer automatically enters Hibernate mode when the
battery pack is running out of power. However, depending on the operating
conditions, the computer may fail to enter Hibernate mode.
If this occurs and the battery pack is running out of power, the computer will be
turned off, resulting in loss of unsaved data.
While the computer is running on battery power, save data frequently.
Before moving your VAIO computer, make sure that the computer is off to avoid
impact or vibration to the running hard disk drive. If the computer is equipped with
the power indicator, make sure that it is completely off.
Hint
By default, your VAIO computer enters Sleep mode automatically after a certain
period of inactivity while running on AC power.
The operations below also place your VAIO computer into Sleep mode.
Press the (Power) button (with the default setting).
Close the LCD screen lid. The computer will enter Sleep mode after a few seconds.
You can restore your VAIO computer from Sleep mode to Normal mode by opening
or raising the LCD screen.
To change the action when you open or raise the LCD screen, start
VAIO Control
Center and change the settings in Power and Battery . To start VAIO Control
Center , see Searching/Starting Apps, Settings, or Files .
Go to Page Top
Related Topic
Notes on Using the Power Source
Notes on Sleep Mode
Back Back to Top
215
Downloaded from www.vandenborre.be
Search