Sony UPX-C300, Operating Instructions Manual

Page: 24 / 211

Operations (Shooting and Printing)
24
To adjust the print quality
On the camera, you can independently adjust the print
quality for color pictures and black & white pictures and
store the adjusted values. Once these values are stored,
the camera automatically selects the appropriate
adjusted value for color prints and black & white prints,
respectively.
For details on adjusting the print quality, see “Adjusting
the Picture Quality” on page 44.
To adjust black & white print quality
When you print a picture in black & white by selecting
B&W, the picture is printed by overlaying yellow,
magenta, and cyan, and therefore may not be perfectly
achromatic. To adjust the black tone, you can use the
print quality adjustment function on the printer.
Printing a Picture Stored in the
Camera’s Built-In Memory
When a picture is taken, its data is stored in the camera’s
built-in memory. To print stored pictures, view them in
Playback mode and select the picture you wish to print.
Then perform the same steps as when printing a picture
from the auto-review display (on page 22).
For details on viewing pictures stored in memory, see
“Viewing a Picture on the LCD” on page 24.
Reprinting a Picture Stored in the
Printer’s Memory (COPY PRINT)
The data for the last picture that was printed is stored in
the printer’s memory. You can reprint this picture.
Note
If you press the
1
button on the printer and set it to
standby mode (so the lamp goes out), the data stored in
the printer’s memory is deleted, and you cannot reprint
the picture.
1
Press the MENU button.
2
Press
V
on the control button to display “COPY
PRINT [>>].”
3
Press
B
on the control button.
“COPY PRINT: 1 [1 – 9 PRINT: EXEC]” appears.
4
Set the number of sheets to be printed by press
v
or
V
on the control button.
A value from 1 to 9 can be set.
5
Press the EXEC button.
The number of pictures set in step
4 is printed.
When printing completes, the READY screen
reappears.
Viewing a Picture on the LCD
1
Set the mode switch to .
A picture stored in the camera’s memory appears on
the LCD.
2
Select a picture to view by pressing the b or B
control button.
1 3
2
5 4
2
1