Sony UP25MD, Instructions For Use Manual

Page: 40 / 76

40
Functions That Can be Set on Menus
Ad
jus
tment
Adjustment
Functions That Can be
Set on Menus
You can set up the printer to meet various specifications.
Once you have adjusted and stored the settings, the printer
operates according to those settings until their values are
modified.
You can set up the printer according to its intended
purpose, connected equipment, or your individual
preferences. You can store up to three sets of user settings,
called user set 1, 2 and 3.
Functions that can be set on those menus are as follows:
Menu Functions to be set Reference
pages
COLOR
ADJUST Adjusting the printout color
(color intensity and contrast)
and sharpness 46
LAYOUT
SETUP Selecting the memory mode 27
Selecting the type of printout 29
Selecting whether or not
white borders are added to
multiple reduced images 32
WINDOW
SETUP Eliminating the black lines
produced on the printout 49
CAPTION Entering a caption 33
PRINTER
SETUP Setting the print quantity 23
Adjusting the tone of the
printout 48
Selecting the print speed 22
SYSTEM SETUP Adjusting the brightness of
the printer window display
61
Setting the tray light mode 61
Setting the cleaning message
display function 61
Setting the baud rate for
computer communication 62
Selecting whether or not the
operation and error tones
sound 61
Adjusting the contrast of
printouts 45
Printing menu configurations 62
Registering user settings 62
USER NAME Editing the user name 62
FUNCTION
SETUP Selecting the image which
appears after storing the
image into memory, the
source image or the memory
image 30
Assigning the function to
remote control units
connected to the REMOTE 2
connector 60
Setting the function of the
CLEAR button 36
COLOR
BALANCE Adjusting the color balance 50
HSV Adjusting printout colors
(specify colors for
adjustment) 52
HDTV SETUP Selecting the input signal 57
Selecting the input signal
type 57
Selecting the input signal
format 57
Selecting the synchronization
method for input signals 58
Selecting the output signal
type 58
Selecting the downconvert
method 59
INPUT SETUP Selecting the input signal 19
Compensating for the input
signals 45
OUTPUT SETUP Erasing the screen display 38
Selecting whether or not
information about the ink
ribbon is displayed 62
Selecting the output signal
from the printer 45
Selecting whether the printer
synchronizes with the internal
sync signal included in
channel G of the RGB signals 13
Matching the video monitor
color to the printout color 45
Menu Functions to be set Reference
pages