Get
ting St
ar
te
d
Loading Paper
12
• To mount printouts on another sheet of paper, use
double-sides tape or a water base adhesive.
• Do not incinerate waste printer paper.
Loading Paper
When loading paper, make sure to follow the notes of the
symbols on the unit.
A paper cutter is mounted in the unit. When
cleaning the thermal head, be careful not to
touch the paper cutter. Touching the paper
cutter may cause injury.
Do not insert your finger into the back of the
paper tray. Your finger may become stuck in
an internal gap, which may lead to injury.
Caution
Do not touch any unit circuitry and the patient at the
same time.
If the unit malfunctions, it may generate voltage that
could be harmful to the patient.
Notes
• Before loading paper in the unit, see “Notes on storing
and handling paper” (page 11).
• Always handle paper carefully when loading to avoid
adversely affecting the quality of the printouts. Never
bend or crease the paper and never touch the printing
surface with your fingers. Inspection gel, fingerprints
or perspiration could cause pictures to blur.
• Do not use any paper other than UPP-110S/110HD/
110HG paper. (page 11)
• Be sure to set “-PP.TYPE” of the “CONFIG.” menu to
the paper to be used. (page 17) You can confirm the
media currently selected on the LCD.
For detailed information on how to confirm, see
“Paper currently selected” (page 21).
A paper cutter is mounted in the unit. When loading
paper, be careful not to touch the paper cutter. Touching
the paper cutter may cause injury.
Caution
Caution
Caution
Summary of Contents for UP-D898MD
Page 31: ...Sony Corporation ...
