UNI-ORL7 and UNI-IRL7 Series
Outdoor and Indoor Dome Housings
Installation and Operation Instructions for the following model:
UNI-ORL7C2
Outdoor Pendant Housing w/ heater & blower, clear lower dome
UNI-ORL7T2
Outdoor Pendant Housing w/ heater & blower, tinted lower dome
UNI-ORL7C2W
Outdoor Pendant Housing w/ heater & blower, clear lower dome, and a
Wireless antenna cable
UNI-ORL7T2W
Outdoor Pendant Housing w/ heater & blower, tinted lower dome, and a
Wireless antenna cable
UNI-IRL7C2
Indoor Pendant Housing without heater & blower, clear lower dome
UNI-IRL7T2
Indoor Pendant Housing without heater & blower, tinted lower dome
Note:
AC 24V power supply for the camera and the heater/blower is an installer/reseller provided item.
Note:
Please note that to achieve the increased depth with the aspheric design for optimal camera
lens to capsule orientation, the capsule is slightly angled around the highest section. This creates
a ”line’, visible to the naked eye, around the upper most section of the capsule. This “line” serves
as the geometric center line used to insure proper camera placement. It is not typically seen by
the camera. However, Sony RZ series PTZ cameras are able to tilt up above the horizon to 25°,
this wide range of tilt motion at a wide angle view may cause this line to be captured in the image.
Mounting instructions for:
SNC-RZ25
SNC-RX530
SNC-RX550
SNC-RX570
SNC-RH124
SNC-RS44
SNC-RS46
81-IN6581
10-14-2009
Quick Reference:
Camera Installation Steps
SNC-RZ25N............................Go to Steps 3-5
SNC-RX Series........................Go to Steps 6-8
Wireless RZ25/RX...................Go to Steps 9-10
SNC-RH/RS.............................Go to Steps 11-18
