–
48
–
–
47
–
KV-XG29M30/XG29M50/XG29M60/
KV-XG29M80/XG29M81/XG29M90
RM-952
KV-XG29M30/XG29M50/XG29M60/
KV-XG29M80/XG29M81/XG29M90
RM-952
5-3. CIRCUIT BOARDS LOCATION
VM1
A
D3
B2
B6
H2
C6
V1 (KV-XG29M81 only)
Note:
•
All capacitors are in µF unless otherwise noted.
•
All electrolytic capacitors are rated at 50V unless otherwise noted.
•
All resistors are in ohms.
k = 1000 , M = 1000k
•
Indication of resistance which does not have rating electrical
power is as follows.
Pitch: 5 mm
Rating electrical power 1/4W (CHIP: 1/10W)
•
: nonflammable resistor.
•
¢
: internal component.
•
: panel designation or adjustment for repair.
•
All variable and adjustable resistors have characteristic curve B
unless otherwise noted.
•
Readings are taken with a color-bar signal input.
no mark : PAL
( ) : SECAM
[ ] : NTSC 3.58
« »
: NTSC 4.43
•
Readings are taken with a 10 M digital m ultimeter.
•
Voltage are dc with respect to ground unless other-
wise noted.
•
Voltage variations may be noted due to normal pro-
duction tolerances.
•
All voltages are in V.
•
: Cannot be measured.
•
Circled numbers are waveform references.
•
: B + bus.
•
: B – bus.
•
: signal path.
Reference information
RESISTOR
: RN
METAL FILM
: RC
SOLID
: FPRD
NONFLAMMABLE CARBON
: FUSE
NONFLAMMABLE FUSIBLE
: RS
NONFLAMMABLE METAL OXIDE
: RB
NONFLAMMABLE CEMENT
: RW
NONFLAMMABLE WIREWOUND
:
*
ADJUSTMENT RESISTOR
COIL
: LF-8L
MICRO INDUCTOR
CAPACITOR
: TA
TANTALUM
: PS
STYROL
: PP
POLYPROPYLENE
: PT
MYLAR
: MPS
METALIZED POLYESTER
: MPP
METALIZED POLYPROPYLENE
: ALB
BIPOLAR
: ALT
HIGH TEMPERATURE
: ALR
HIGH RIPPLE
Note: The component identified by shading and
mark
!
are critical for safety. Replace only with
part number specified.
*
5-4. SCHEMATIC DIAGRAMS AND PRINTED WIRING BOARDS