Using Your New TV
Using Y
our New TV
5
AUTO
PROGR
1
PROGR
1
VHF LOW AUTO
1
2
Front of TV
Step 3
Preset the channels automatically
Tips
• If you want to stop automatic channel presetting, press SELECT twice.
• If your TV has preset an unwanted channel or cannot preset a particular
channel, then preset your TV manually (see page 9).
Note (KV-XG29M80/XG29M50 only)
• During automatic channel presetting, your TV screen will indicate “B/G” ,
“I”, “D/K” or “M” for the TV system.
Notes
• If you connect a monaural VCR, connect the yellow plug to
(the yellow
jack) and the black plug to -L (MONO) (the white jack).
• If you connect a VCR to the
˘
(antenna) terminal, preset the signal
output from the VCR to the program number 0 on the TV.
• Do not connect video equipment to the
…
2 (video input) jacks at the
front and the rear of your TV at the same time; otherwise the picture will
not be displayed properly on the screen.
• When no signal is input to the connected video equipment, the TV screen
becomes blue.
Insert the batteries
into the remote
Step 2
Note
• Do not use old batteries nor use different types of batteries together.
Summary of Contents for Trinitron KV-XG29
Page 1: ......
