–
36
–
KV
-ES38N90
RM-958
•
REMOVAL OF ANODE-CAP
NOTE : After removing the anode, short circuit the anode of the picture tube and
the anode cap to the metal chassis, CRT shield or carbon paint on the
CRT.
•
REMOVING PROCEDURES
1
Do not damage the surface of anode-caps with sharp shaped objects.
2
Do not press the rubber too hard so as not to damage the inside of anode-cap.
A metal fitting called the shatter-hook terminal is built into the rubber.
3
Do not turn the foot of rubber over too hard.
The shatter-hook terminal will stick out or damage the rubber.
•
HOW TO HANDLE AN ANODE-CAP
3
When one side of the rubber cap is separated from the anode button, the anode-cap
can be removed by turning up the rubber cap and pulling it up in the direction of the
arrow
c
.
2
Using a thumb pull up the rubber cap firmly in the direction indicated by the arrow
b
.
1
Turn up one side of the rubber cap in the direction indicated by the arrow
a
.
FRAME SUB ASSY, BOTTOM REMOVAL
Slide
Screw Special (Dia. 8)
×
2
(+) TP 4
×
9
Screw Special (Dia. 8)
×
2
(+) TP 4
×
9
Screw Special (Dia. 8)
Corner Block
(+) TP 4
×
9
×
2
a)
b)
NOTE : When replacing the Frame Sub-Assy Top and Bottom, fix the original corner
block to the new part.
Anode button
a
a
b
b
c
Summary of Contents for TRINITRON KV-ES38N90
Page 98: ... 122 KV ES38N90 RM 958 MEMO ...
