![Sony TRINITRON KV-DR34M97 Service Manual Download Page 10](http://html.mh-extra.com/html/sony/trinitron-kv-dr34m97/trinitron-kv-dr34m97_service-manual_1330950010.webp)
– 9 –
KV-DR34M97
RM-991
$
Band, DGC(1) Removal (only top-side)
5
Anode Cap Removal
)
Earth Coating Assy(2) Removal
7
Loosen the Neck Assembly
fixing screw and remove
9
Loosen the Deflection Yoke
fixing screw and remove
6
C Board Removal
!
Chassis Assy Removal
8
VM Board Removal
(
Spring Tension(2)
Removal
#
Supports, CRT(2) Removal
&
DGC(2) Removal
%
Holder, DGC(2) Removal
~
Nut, Locking (4)
+
Nut special CRT (4)
"
Bracket Woofer(2) Removal
1-12. H1 AND H2 BOARDS REMOVAL
1-13. A AND D BOARDS REMOVAL
1-14. PICTURE TUBE REMOVAL
Note:
• Please make sure the TV set is not in standing position before removing necessary CRT support located on bottom
right and left.
• When removing the Nut Locking: first make sure to hold the Nut special CRT with a spanner while opening the Nut
Locking using a torque driver. Then proceed to remove the Nut special CRT using a torque driver.
1) Place the TV set with the CRT face down on a cushion (jig).
2) Removal the Rear Cover.
3) Removal the 3D Box.
4) Unplug all interconnecting leads from the Deflection Yoke, Neck Assy, Degaussing Coils and CRT grounding strap.
5
One screw
(3
×
12)(+)(BVTP)
2
Three screws
(3
×
12)(+) BVTP
3
Four hooks
5
One screw
(3
×
12)(+)(BVTP)
1
Five connectors
6
Four hooks
7
D Board
4
A Board
3
Three hooks
1
Five hooks
4
Cover, H
2
H1 Board
5
H2 Board