– 9 –
KV-DR29M61/DR29M81
RM-991
"
Band, DGC(1) Removal (only top-side) (x1)
4
Anode Cap Removal
not used for
these models
&
Earth Coating Assy Removal (x2)
6
Loosen the Neck Assembly
fixing screw and remove
8
Loosen the Deflection Yoke
fixing screw and remove
5
C Board Removal
9
Chassis Assy Removal
7
VM Board Removal
%
Spring Tension
Removal (x2)
!
Supports, CRT Removal (x2)
$
DGC Removal (x1)
#
Holder, DGC Removal (x2)
)
Nut special CRT (x4)
(
Nut, Locking (x4)
1-12. PICTURE TUBE REMOVAL
Note:
• Please make sure the TV set is not in standing position before removing necessary CRT support located on bottom
right and left.
• When removing the Nut Locking: first make sure to hold the Nut special CRT with a spanner while opening the Nut
Locking using a torque driver. Then proceed to remove the Nut special CRT using a torque driver.
1) Place the TV set with the CRT face down on a cushion (jig).
2) Removal the Rear Cover.
3) Unplug all interconnecting leads from the Deflection Yoke, Neck Assy, Degaussing Coils and CRT grounding strap.