13
16
Additional TV Features
Before listening to Dolby Pro Logic encoded programmes, you can adapt the Dolby features to suit your own taste. Normally this
is only requires when you install the TV and the speakers, or when changing the speaker positions.
Setting Up Dolby Pro Logic
1. Press the MENU button on the remote control to display the
menu on the TV screen.
2. Press the
v
button on the remote control to select the
symbol on the menu screen then press the
b
button to enter the
‘PRESET’ menu.
3. Press the
v
button to select ‘Dolby Pro Logic Setup’ on the
menu screen then press the
b
button to enter the ‘DOLBY PRO
LOGIC SETUP’ menu.
4. Press the
V
or
v
buttons to select ‘Mode’, then press the
b
button to enter. Press the
b
or
B
buttons to select one of the
following modes then press the OK button to store the chosen
mode:
Dolby Pro Logic: all 5 speakers are activated
Dolby 3 stereo:
surround speakers are not used
5. Press the
v
button to select ‘Centre Mode’, then push the
b
button to enter. Press the
b
or
B
buttons to select one of the
following modes then press the OK button to store the chosen
mode:
Normal:
all 5 speakers are activated
Wide:
wider bandwidth for centre speaker
Phantom:
centre speaker is not used
6. Press the
v
button to select ‘Test Tone’ then push the
b
button
to enter. Press the
b
or
B
buttons to select ‘On’, then press the
OK button.
The test tone will cycle through all the speakers.
7. Press the
v
button to select the ‘Left Speaker’, then press the
b
button to confirm. The tone remains at the left speaker.
8. Press the
V
or
v
buttons to alter the sound level, then press the
OK button.
9. Repeat steps 7 and 8 to select and adjust the ‘Centre’, ‘Right’,
and ‘Surround’ speakers, so that the sound output from all
speakers are balanced in relation to your sitting position.
10. Press the MENU button to remove the display from the TV
screen.
PICTURE CONTROL
Contrast
Reset
FormatFormat
Picture Mode
Personal
. . . . . . . . .
Wide
PICTURE CONTROL
Contrast
Reset
FormatFormat
Picture Mode
Personal
. . . . . . . . .
Wide
19
Additional TV Features
With this feature you can a) manually fine-tune the TV to obtain a better picture reception if the picture is distorted or b) preset
the AV output for the programme positions of channels with scrambled signals (eg from a pay TV decoder). In this way a
connected VCR records the unscrambled signal.
Using the further programme preset feature
1. Press the MENU button on the remote control to display
the menu on the TV screen.
2. Press the
v
button to select the
symbol on the menu
screen then press the
b
button to enter the ‘PRESET’
menu.
3. Press the
v
button to select ‘Further Programme Preset’
then press the
b
button to enter the ‘FURTHER
PROGRAMME PRESET’ menu.
4. Press the
V
or
v
buttons to select the relevant
programme number then press the
b
button repeatedly
to select a) AFT or b) DECODER. The selected item
changes colour.
Note: AFT will only be available on analoge channels.
5. a) AFT
Press the
V
or
v
buttons to fine tune the channel
frequency over a range of -15 to +15. Press the OK
button to confirm. Repeat steps 4 and 5a if you wish to
fine tune other channels.
b) DECODER
Press the
V
or
v
buttons to select AV1, AV2 or AV3 for
the programme position and press the OK button to
confirm. You can now attach a decoder to the AV1, AV2
or the AV3 socket on the back of the TV and the picture
from that decoder will appear on this programme
number. Repeat steps 4 and 5b to preset the AV output
for other programme positions.
6. Press the MENU button to remove the menu from the
TV screen.
PICTURE CONTROL
Contrast
Reset
FormatFormat
Picture Mode
Personal
. . . . . . . . .
Wide
PICTURE CONTROL
Contrast
Reset
FormatFormat
Picture Mode
Personal
. . . . . . . . .
Wide
0
1
2
3
4
5
6
7
8
9
PROG
Off
Off
AV1
Off
AV2
Off
Off
Off
Off
Off
DECODER
On
On
On
On
On
On
On
On
On
On
AFT
FURTHER PROGRAMME PRESET
0
1
2
3
4
5
6
7
8
9
PROG
Off
Off
AV1
Off
AV2
Off
Off
Off
Off
Off
DECODER
On
On
On
On
On
On
10
On
On
On
AFT
FURTHER PROGRAMME PRESET
