Sony TRINITRON KV-2199M5, Service Manual

Page: 5 / 38

– 5 –
Getting Started
6 -GB
Presetting channels Presetting channels automatically
1
Press SELECT on the remote commander or
the TV until “AUTO PROGRAM” appears on
the screen.
2
Press +/– on the remote commander or
.
+/– on the TV.
3
Press +/– on the remote commander or
.
+/– on the TV again.
To start presetting channels automatically
from the specified program position
Press PROGR +/– or number buttons on the remote
commander or PROGR +/– on the TV until the
required program position appears on the screen after
step 2 of “Presetting channels automatically.”
You can preset up to 100 TV channels in numerical
sequence from program position 1 using the buttons on
the remote commander or the TV.
You can preset TV channels quickly, automatically or
manually.
Quick channel presetting
1
Press
U
to turn on the TV.
When the TV is turned on in standby mode, press
u on the remote commander.
2
Press SELECT and PROGR + on the TV
simultaneously for one to two seconds.
Front of TV
Remote commander
Number
PROGR +/–
+/–
SELECT
1 2 3 1
SELECT PROGR
SELECT PROGR
AUTO PROGRAM
SELECT
SELECT
or
VHF LOW B/G
1
or
1 2 3 1
or
1 2 3
4 6
7 8 9
÷ 0
5
PROGR PROGR
or or
7
Getting Started
-GB
Presetting channels manually
1
Press SELECT on the remote commander or
the TV until “MANUAL PROGRAM” appears
on the screen.
2
Press +/– on the remote commander or
.
+/– on the TV.
3
Press PROGR +/– or number buttons on the
remote commander or PROGR +/– on the TV
until the required program position
appears on the screen.
4
Press +/– on the remote commander or
.
+/– on the TV until the required channel
picture appears on the screen.
5
Press SELECT on the remote commander or
the TV.
MANUAL PROGRAM
SELECT
SELECT
or
or
or
or
1 2 3
4 6
7 8 9
÷ 0
5
PROGR PROGR
VHF LOW B/G
or
1
SELECT
SELECT
or
Disabling program positions
1
Press PROGR +/– or number buttons on the
remote commander or PROGR +/– on the TV
until the unused or unwanted program
position appears on the screen.
2
Press SELECT on the remote commander or
the TV until “MANUAL PROGRAM” appears
on the screen.
3
Press +/– on the remote commander or
.
+/– on the TV.
4
Press PIC MODE on the remote commander.
5
Press SELECT on the remote commander or
the TV.
To preset the disabled program position again
Preset the channel quickly, automatically or manually.