Getting Started
4
Connections
Connecting a VHF antenna or a combination VHF/UHF antenna
— 75-ohm coaxial cable (round)
Attach an optional IEC antenna connector to the 75-ohm coaxial cable. Plug the connector into the
(antenna) socket at the rear
of the TV.
Getting Started
Connecting the 3D WOOFER
p
KV-2193MF1A only
1
Attach the 3D WOOFER into the foothold on the top of the TV.
2
Connect the wires to the 3D WOOFER (8
Ω
) terminals at the rear of the TV.
The red wire should be connected to the
‘
red terminal and the black wire to the
’
black terminal.
1
3D WOOFER
On a wall
or
Rear of TV
Rear of TV
Notes
• Connect only the supplied 3D WOOFER; otherwise the TV may malfunction.
• Unplug the TV from the wall outlet when connecting the 3D WOOFER.
• To prevent a malfunction caused by a short circuit of the terminals, make sure that none of the 3D WOOFER wire strands stick out,
making contact with the neighbouring speaker terminal.
2
Red wire
Black wire
Connecting an indoor antenna
p
KV-2193MF1 only
Note
• You are advised to use an outdoor antenna for better reception.
1
2
3