— 23 —
KV-20M42/20S42/20S43/21MB42C/21MB42M/21MB42P/21ME42/21ME42C/
21SB42C/21SB42M/21SE42/21SE42C/21SE82/21SE82C
V. Size Adjustment (VSIZ)
1. Input a crosshatch signal.
2. Set to Service Adjustment Mode.
3. Select the VSIZ item with
and
.
4. Adjust value of VPOS with
and
for the best vertical
center.
5. Press
then
to save into the memory.
V. Center Adjustment (VPOS)
1. Input a crosshatch signal.
2. Set to Service Adjustment Mode.
3. Select the VPOS item with
and
.
4. Adjust value of VPOS with
and
for the best vertical
center.
5. Press
then
to save into the memory.
H. Center Adjustment (HPOS)
Perform this adjustment after checking H. Frequency.
1. Input a crosshatch signal.
2. Set to Service Adjustment Mode.
3. Select the HPOS item with
and
.
4. Adjust the value of HPOS with
and
for the best
horizontal center.
5. Press
then
to save into the memory.
V. Linearity (VLIN), V Correction
1. Input a crosshatch signal.
2. V. correction is automatically adjusted from the circuit
and should satisfy the conditions below.
Service Adjustment Mode Memory
1. Change the value of the DCOL item to 1.
2. After completing all adjustments, press
then
.
Read From Memory
SERVICE READ
Green
Red
ENTER
0
