Getting Started
Getting Started
5
1.
When you switch on the TV for the first time, the Sony logo is displayed
on the TV screen, followed by the ‘Picture Rotation’ prompt. Sometimes
the Earth’s natural magnetism can cause the screen to look slanted.
a) If no correction is required, press
B
to select ‘Not Necessary’.
b) If some correction is required, press OK to select ‘Adjust now’.
Press
V
or
v
to correct the slant. Press OK to confirm.
2.
The ‘Autotune’ prompt appears on the TV screen. Press OK to select
‘Yes’.
3.
The ‘Region Set-up’ menu appears on the TV screen. Press
V
or
v
to
highlight your chosen region. Press OK to confirm.
The digital autotune display appears on screen and the TV starts to
search for all the available digital channels. This may take some time,
please be patient and do not press any buttons on the TV or remote
control.
If no digital or analogue channels are found, a message appears asking
to confirm that the aerial is connected correctly. Check all the aerial
connections and press OK to start the automatic tuning process again.
When the digital autotune is complete, the analogue autotune starts to
search for all the available analogue channels.
Once all available digital and analogue channels have been stored, the
TV returns to normal operation, displaying the digital channel stored on
channel number 1. If no digital channels were found, the analogue
channel stored on channel number 1 is displayed.
The TV has now tuned
in all the available channels
1.
Press the DIGITAL/
a
button to switch between digital and analogue
mode.
In digital mode, an information banner appears briefly on screen when
the channel is changed.
In analogue mode, the channel number appears in green lettering when
the channel is changed.
Switching between digital and analogue mode
6
The ‘Autotune’ prompt.
Automatically tuning the TV
5
The ‘Picture Rotation’ prompt.
Do you want to start
automatic tuning?
Yes:
OK
No:
The ‘Region Set-up’ menu.
Digital Set-up
Region Set-up
Press OK key to set your region
NEW SOUTH WALES / AUSTRALIAN CAPITAL TERRITORY
VICTORIA
QUEENSLAND
SOUTH AUSTRALIA
WESTERN AUSTRALIA
TASMANIA
Back
NORTHERN TERRITORY
If picture slants, please
adjust picture rotation.
Not Necessary:
Adjust Now:
OK
1.
Connect the TV plug to your mains socket (220 - 240V AV, 50Hz)
2.
Push in the On/Off button (labelled
!
) on the front of the TV.
z
If the red standby mode indicator on the front of the TV is lit, press the TV I/
1
button on the remote control to switch on the set. Please be patient as the picture
may take a few moments to appear on the TV screen.
Switching on the TV
4
100Hz
Digtial Plus
On/Off
button
