— 7 —
HMD-A240
Remove (4) Screws (+BVTP 4 x 16)
Release top claws - Insert the tip of a
ß
athead
screwdriver approximately 0.25" to unlock the
claw. Gently lift up and then back to remove
the cabinet.
1-1. CABINET REMOVAL
SECTION 1: DISASSEMBLY
1-2. SERVICE POSITION
2
2
1
Gently wiggle the A board back and forth to unplug
it from the Neck Assembly.
Remove all necessary connections and rotate the
D Board and rest it on its side to expose the bottom.
Be sure to reconnect all wires.
Fabricate a temporary ground wire with a male
stakon connector on one end and an alligator clip
on the other.
Reconnect ground as shown below.
1
2
4
1
2
1
2
3
4
