48
Main Operation Window
Ch
apt
er 3 Men
u
Wind
o
w
You can select from [White] (white), Red (red), Green
(green), Blue (blue), Yellow (yellow), Cyan (cyan) or
Magenta (magenta).
Bright:
Sets the luminance of the aspect marker.
You can select from [90IRE] (bright) or 40IRE (dark).
Area Marker 1:
Sets whether or not to display the area
marker 1 ([On] or Off).
Aspect Mode:
Sets the aspect ratio of the area marker
1.
You can select from [16:9], 15:9, 14:9, 13:9, 4:3,
2.39:1, 2.35:1, 1.85:1, 1.66:1, 1.896:1 or Variable.
When Variable (dot) is selected in Area Size, the size
of the area marker 1 is set in pixel unit of the input
signal and the Aspect Mode setting becomes invalid.
Aspect:
Sets the aspect ratio of the area marker 1 when
Variable is selected in Aspect Mode.
Set to 1.00:1 to 3.00:1. [1.78:1]
Area Size:
Sets the size of the area marker 1.
You can select from [80%], 88%, 90%, 93%, Variable
(%) or Variable (dot).
Width:
Sets the width of the area marker 1 when Area
Size is set to Variable (%) or Variable (dot).
When Variable (%) is selected
Set to 50 to 100 (%). [80]
When Variable (dot) is selected
Set to 360 to 2048 (dot). [512]
Height:
Sets the height of the area marker 1 when
Area Size is set to Variable (%) or Variable (dot).
When Variable (%) is selected
Set to 50 to 100 (%). [80]
When Variable (dot) is selected
Set to 240 to 1080 (dot). [384]
Mode:
Sets the shape of the area marker 1.
You can select from [Shape A], Shape B or Shape C.
The size of the area is as follows depending on the
settings of Area Size, Aspect Mode and aspect ratio of
the picture.
Example: Area Size 80%, Aspect Mode 16:9 or
2.39:1
With 16:9
With 2.39:1
Line:
Sets the thickness of the area marker 1.
You can select from [Thick] (thick) or Thin (thin).
Color:
Sets the color of the area marker 1.
You can select from [White] (white), Red (red), Green
(green), Blue (blue), Yellow (yellow), Cyan (cyan) or
Magenta (magenta).
Bright:
Sets the luminance of the area marker 1.
You can select from [90IRE] (bright) or 40IRE (dark).
Area Marker 2:
Sets whether or not to display the area
marker 2 (On or [Off]).
The setting items are the same as for Area Marker 1 (page
48).
Center Marker:
Sets whether or not to display the center
marker (On or [Off]).
Mode:
Sets the display mode of the center marker.
You can select from Long (long) or [Short] (short).
Color:
Sets the color of the center marker.
You can select from [White] (white), Red (red), Green
(green), Blue (blue), Yellow (yellow), Cyan (cyan) or
Magenta (magenta).
Bright:
Sets the luminance of the center marker.
You can select from [90IRE] (bright) or 40IRE (dark).
Position:
Sets the display position of the marker.
Horizontal:
Sets the horizontal position of the marker.
Set to –65 (leftward) to +65 (rightward). [0]
Note
Note
Shape A
Shape B
Shape C
Aspect Mode 16:9
Aspect Mode 2.39:1
80%
80%
Aspect Mode 16:9
Aspect Mode 2.39:1
80%
80%
Summary of Contents for Trimaster SRM-L560
Page 136: ...Sony Corporation ...
