manualshive.com logo in svg

Sony TRIMASTER HX, Operating Instructions Manual, Page: 9 / 51

Share
Download
Sony TRIMASTER HX Operating Instructions Manual Download Page 9

 

9

protective function for the LCD panel activates. Keep the 
temperature of the peripheral environment of the unit 
around 25 °C (77 °F) to avoid brightness decrease due to the 
protection function. For the installation environment of the 
unit, see “On Installation” (page 3).
For details on the HDR (High Dynamic Range) display, see 
“On High Brightness Display” (page 4).

About operations using the Sony monitor control 
unit (the controller)

When the optional controller (BKM-16R or BKM-
17R) is connected, the following operations are 
available with the buttons of the controller.
For details on each function, see “Adjustment 
Using the Menus” (page 18).

Menu operation buttons

Power button

Rotary encoder/MANUAL buttons

Numeric buttons

Function buttons

Note

Up to a total of three controller units (including 
BKM-16R and BKM-17R) can be simultaneously 
connected to a BVM-HX310 unit.

Button

Operations

MENU button

When the on-screen menu is not 
displayed, press the button to display 
the menu. Press again to clear the 
menu.
When the menu is displayed, press the 
button to reset the value of an item to 
the previous value.

ENTER button

When the menu is displayed, press the 
button to confirm a menu item or 
setting value.

However, displaying the signal format 
by pressing and holding the button is 
not available.

UP button
DOWN button

When the menu is displayed, press the 
button to select a menu item or setting 
value.

Button

Operations

MONITOR  
switch

Switches the operating mode of the 
monitor.
Press the button for the sleep mode 
when the monitor is in the operating 
mode. The power indicator on the 
front panel lights in red.
Press the button for the operating 
mode when the monitor is in the sleep 
mode.

Knob

Operations

CONTRAST knob

Adjusts the picture contrast.

BRIGHT knob

Adjusts the picture brightness.

CHROMA knob

Adjusts the color intensity.

PHASE knob

Available only in the color temperature 
adjusting menu.
No other operations are available.

Button

Operations

CONTRAST MANUAL 
button

Press the button to adjust contrast 
manually.

BRIGHT MANUAL 
button

Press the button to adjust brightness 
manually.

CHROMA MANUAL 
button

Press the button to adjust color 
intensity manually.

PHASE MANUAL 
button

Available only in the color temperature 
adjusting menu.
No other operations are available.

Button

Operations

1 to 9 button

Turns on or off functions assigned to 
the numeric buttons from 1 to 9 on the 
controller.
The factory default settings are 
following:
1 button: SDI1 4K
2 button: SDI1 2K
3 button: SDI2 4K
4 button: SDI2 2K
5 button: HDMI
6 button: Native Scan
7 button: Internal Signal
8 button: Internal Signal Pattern
9 button: Marker
Each function can be assigned at 
“Function/Numeric Button Setting” 
(page 37) of the “Serial Remote” menu.

Ent button

Operates similar to the ENTER button 
on the controller.

Button

Operations

F1 to F16 button

Turns on or off functions assigned to 
the function buttons on the controller. 
The following functions are available.
Mono, Blue Only, R Off, G Off, B Off, 
Character Off, Native Scan, Interlace, 
Aperture (selecting the manually 
adjusted setting in Aperture), Marker, 
Aspect Marker, Area Marker1, Area 
Marker2, Center Marker, Aspect 
Marker-Line, Aspect Blanking-Black, 
Aspect Blanking-Half

Summary of Contents for TRIMASTER HX




















































Reviews:

No comments