manualshive.com logo in svg

Sony Tektronix WFM 1125, User Manual

Share
Download
Sony Tektronix WFM 1125 User Manual Download Page 66

Reference

3-24

WFM 1125 Option 0A/0B/0C/0D User Manual

GOTO EAV.

Jumps to the sample address at which the EAV (End of Active Video)

exists, and displays the data starting from that sample address.

GOTO SAV.

Jumps to the sample address at which the SAV (Start of Active Video)

exists, and displays the data starting from that sample address.

UPDATE/FREEZE.

Determines whether the status display is updated (UPDATE) or

not (FREEZE).

Data of 24 words are displayed in this area. From left to right column, they are as
follows: sample address, Y data, P

b

 data, and P

r

 data.

When SAMPLE is assigned to the SELECT knob with the LINE/SAMPLE bezel
menu, turning the knob clockwise or counterclockwise scrolls the displayed data
up or down, respectively.

Pressing the SELECT button toggles F1 and F2 (field 1 and field 2).

The line selection function is always active in the Status display mode. When
you enter into the Status display from an another display mode, the line selection
mode will automatically be available, and the line number previously selected
will be used. All lines, including vertical blanking, can be selected.

Vector Display

The waveform monitor provides a conventional vector display that plots the two
color difference signals, P

b

 and P

r

, against each other. The Vector display is

useful for checking the chrominance phase and amplitude.

Press the BOWTIE/VECTOR button to select VECTOR. Press the VECTOR
bezel button to select Vector display.

Vector modes can operate with 75% or 100% color bar signals. Press the
INTEN/MENU button and select the COLOR BARS menu to select the 75% or
100% graticule to match your test signal.

For Option 0A, 240M/274M format mode of Option 0C, or Interlace mode of
Option 0D, you may select either the BTA or the SMPTE graticule by pressing
the INTEN/MENU button and then choosing 240M (BTA S-001M or SMPTE
240M) or 274M (SMPTE 274M) in the COLOR menu.

The Vector display plots the two color difference signals, P

b

 and P

r

, against each

other, similar, but not identical, to a composite vectorscope. Figure 3–17 shows
how the color difference signals are plotted to create the Vector display.

Data DisplayArea

Line Selection in Status

Display

Summary of Contents for Tektronix WFM 1125











































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands