– 9 –
Record BIAS Adjustment
Setting:
REC LEVEL control: Standard record position (See page 7)
Set to the TEST mode (REC MEMORY mode). (See page 7)
Procedure:
1. Mode: Record
Record Level Adjustment
Setting:
REC LEVEL control: Standard record position (See page 7)
Set to the TEST mode (REC MEMORY mode). (See page 7)
Procedure:
1. Mode : Record
set
AF OSC
attenuator
600
Ω
10 k
Ω
blank tape
CS-123
LINE IN
1) 315 Hz
2) 10 kHz
50 mV (– 23.8 dB)
set
AF OSC
attenuator
600
Ω
10 k
Ω
blank tape
CS-123
LINE IN
315 Hz, 50 mV (– 23.8 dB)
2. Mode: Playback
+
–
set
LINE OUT
47 k
Ω
recorded portion
level meter
3. Confirm playback the signal recorded in step 1 become ad-
justment level as follows.
4. If these levels do not adjustment level, adjust the RV152 (L-
CH) and RV252 (R-CH) to repeat step 1 and 2.
Adjustment Level:
Playback output of 10 kHz to playback
output of 315 Hz: ± 0.5 dB.
Adjustment Location: AUDIO board (See page 10)
2. Mode: Playback
+
–
set
LINE OUT
47 k
Ω
recorded portion
level meter
3. Confirm playback the signal recorded in step 1 become ad-
justment level as follows.
4. If these levels do not adjustment level, adjust RV153 (L-CH)
and RV253 (R-CH) to repeat step 1 and 2.
Adjustment Level:
– 23.8 ± 0.5 dB (47 to 53 mV)
Adjustment Location: AUDIO board (See page 10)
Summary of Contents for TC-TX77
Page 3: ... 3 SECTION 1 GENERAL This section is extracted from instruction manual ...
Page 13: ......
Page 14: ......
Page 15: ......