background image

8

Recording a CD

— CD Synchro Recording

The CD SYNC button lets you record from a
CD to a tape easily.  You can use TYPE I
(normal) or TYPE II (CrO

2

) tape, since the

tape deck automatically detects the tape type.

3

Place a CD on the disc tray of the
DHC-MD313.

4

Set DIRECTION to 

A

 to record on

one side.  Set it to 

a

 to record on

both sides.

5

Press CD SYNC on the tape deck.

The tape deck stands by for recording
and the CD player stands by for
playback.  The indicators on the CD
SYNC, 

®

REC, 

·

 (for the top side) and

 buttons light up.

If you want to record starting from the
bottom side, press 

ª

 (for the bottom

side) so the indicator on the 

ª

 button

lights up.

6

Press 

 on the tape deck.

Recording starts.

To stop recording

Press 

π

 on the tape deck or TAPE

p

 on the

remote.

Tips

• When you press POWER on the tape deck, only

the tape deck turns on. Press POWER on the
DHC-MD313 to turn on the DHC-MD313
component system.

• Inserting the tape when the power is off

automatically turns on the tape deck only. Press
POWER on the DHC-MD313 to turn on the DHC-
MD313 component system before recording.

• The cassette indicator lights up in red when a

cassette is inserted and goes off when no cassette
is inserted.

• When you want to reduce the hiss noise in low-

level high-frequency signals, set DOLBY NR to
ON before step 5.

• If the tape reaches the end of the top side during

both sides recording, the fadeout feature prevents
the track from ending abruptly at the end of the
tape (

Fade Synchro

).  The track is recorded again

from the beginning of the bottom side.

• The fadeout feature also works when you record

on one side only.

Notes

• You cannot listen to other sources while recording.
• When you record on both sides, be sure to start

from the top side.  If you start from the bottom
side, recording stops at the end of the bottom side.

* This tape deck is equipped with the Dolby B-type

noise reduction system.

1

Press POWER on the DHC-MD313
to turn on the DHC-MD313
component system.

The tape deck turns on automatically.

2

Insert a blank tape.

4

5

Cassette
indicator

1

TAPE

p

The remote
supplied with
the DHC-MD313

With the side you want to
record on facing up

2

DOLBY NR*

π

ª

6

Tape deck
TC-TX313

·

Summary of Contents for TC-TX313













Reviews: