7
Operations
5
Press DIRECTION repeatedly until
g
appears to record on one side or
h
(or
j
) to record on both sides.
6
Press
S
on the tape deck.
Recording starts.
When the recording is completed, the CD
player and the tape deck stop automatically.
To
Do this
Stop recording
Press
s
on the tape deck or CD
player.
Remove the
tape and CD
Press
A
on the tape deck and CD
player in stop mode.
Tips
• When you want to record on the reverse side, press
h
on the tape deck in step 5.
• When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.
• If you select both sides recording and the tape
reaches the end of the front side part-way through a
track, the entire track is recorded again from the
beginning of the reverse side.
• When you want to reduce the hiss noise in high-
frequency signals recorded at low level, press
DOLBY NR after step 5 so “DOLBY NR” appears
in the display. Turning DOLBY NR on reduces the
noise when playing back these types of signals.
Playing a tape
You can use any type of tape, TYPE I (normal),
TYPE II (CrO
2
) or TYPE IV (metal), since the
tape deck automatically detects the tape type
(ATS*).
4
1
3
DOLBY NR
**
* ATS: Automatic Tape Selection
** This tape deck is equipped with the Dolby B-type
noise reduction system.
1
Press
A
on the tape deck to open the
cassette tray and insert a recorded tape.
With the side you want to play facing up.
Press
A
again to close the cassette tray.
2
Turn FUNCTION on the amplifier until
“TAPE” appears.
3
Press DIRECTION repeatedly until
g
appears to play one side or
h
(or
j
*) to play both sides.
* The tape deck stops automatically after
repeating the sequence five times.
continued
