Sony TA-ZH1ES Service Manual Download Page 1

SERVICE MANUAL

Sony Video & Sound Products Inc.

TA-ZH1ES

HEADPHONE AMPLIFIER

9-896-334-01

2016J33-1

© 

2016.10

US Model

Canadian Model

AEP Model

UK Model

E Model

Australian Model

Chinese Model

Ver. 1.0  2016.10

SPECIFICATIONS

Note:

Be sure to keep your PC used for service and 
checking of this unit always updated with the 
latest version of your anti-virus software.
In case a virus affected unit was found during 
service, contact your Service Headquarters. 

Section for headphone amplifier

PHONES (headphones) section

Rated power output

BALANCED: 1,200 mW + 1,200 mW (32 Ω, 
THD 1%)

Frequency characteristics

BALANCED: 4 Hz - 80 kHz (-3 dB, D.C.PHASE 
LINEARIZER OFF)

Playing frequency range

BALANCED: 4 Hz - 200 kHz (D.C.PHASE 
LINEARIZER OFF)

Supported impedance

Input section

USB-B section

Supported format

PCM 2ch: 44.1/48/88.2/96/176.4/192/352.8/
384/705.6/768 kHz (16/24/32 bit)
DSD 2ch: 2.8/5.6/11.2/22.4 MHz (1 bit)

WALKMAN port (for WALKMAN®/Xperia™

 

connection) section

Supported format

PCM 2ch: 44.1/48/88.2/96/176.4/192/352.8/
384 kHz (16/24/32 bit)
DSD 2ch: 2.8/5.6/11.2 MHz (1 bit)

COAX (coaxial) IN section

Input impedance

75 Ω

Supported format

PCM 2ch: 32/44.1/48/88.2/96/176.4/192 kHz 
(16/24 bit)

OPT (optical) IN section

Supported format

PCM 2ch: 32/44.1/48/88.2/96 kHz (16/24 bit)

LINE IN L/R section

Maximum input voltage

2 Vrms

Input impedance

50 kΩ

Pre-out section

PRE OUT L/R section

Output voltage

2 Vrms (Fixed)

Output impedance

100 Ω

General

Power requirements

Power consumption

35 W

Power consumption (during standby mode)

0.3 W

Dimensions (w/h/d) (including projecting parts)

Approx. 210 mm × 65 mm × 314 mm 
(8.27 in × 2.56 in × 12.37 in)

Mass

Approx. 4.4 kg (9.7 lb)

Supplied Accessories

Headphone amplifier
AC power cord (mains lead)
USB cable (USB-A/USB-B)
Digital cable for WALKMAN®
Remote control
R03 (size AAA) batteries
Operating instructions
Precautions/Specifications

Design and specifications are subject to 
change without notice.

Area

Supported impedance

U.S.A. and 
Canada

12 Ω - 600 Ω

Other countries

8 Ω - 600 Ω

Area

Power requirements

U.S.A., Canada 
and Taiwan

120 V, 50/60 Hz

Other countries

220 V - 240 V, 50/60 Hz

On Copyrights

WALKMAN® and WALKMAN® logo are 
registered trademarks of Sony 
Corporation.
“Xperia” and “Xperia Tablet” are 
trademarks of Sony Mobile 
Communications AB.
Macintosh and Mac OS are trademarks of 
Apple Inc., registered in the U.S. and other 
countries.
Windows, the Windows logo, and 
Windows Media are either registered 
trademarks or trademarks of Microsoft 
Corporation in the United States and/or 
other countries.
This product is protected by certain 
intellectual property rights of Microsoft 
Corporation. Use or distribution of such 
technology outside of this product is 
prohibited without a license from 
Microsoft or an authorized Microsoft 
subsidiary.
The system names and product names 
indicated in this manual are generally the 
trademarks or registered trademarks of 
the manufacturer.
™ and ® marks are omitted in this manual.

Summary of Contents for TA-ZH1ES













































































































Reviews: