Sony TA-DA9000ES, Operating Instructions Manual

Page: 4 / 60

4
GB
Steps 1a through 1c beginning on page 6 describe how to hook up your components to this amplifier.
Before you begin, refer to “Connectable components” below for the pages which describe how to
connect each component.
Connectable components
a)
Model with a DIGITAL OPTICAL OUTPUT or DIGITAL COAXIAL OUTPUT jack, etc.
b)
Model with MULTI CH OUTPUT jacks, etc. This connection is used to output the audio decoded by the
component’s internal multi-channel decoder through this amplifier.
c)
Model equipped only with AUDIO OUT L/R jacks, etc.
d)
Model with component video (Y, P
B
/C
B
/B-Y, P
R
/C
R
/R-Y) input jacks.
Getting Started
1: Check how to hookup your components
Component to be connected Page
DVD player
With digital audio output
a)
6–7
With multi-channel audio output
b)
9–10
With analog audio output only
c)
6–7
LD player
With digital audio output
a)
6
With analog audio output
c)
6
TV monitor
With component video input
d)
7 or 10
With S-Video or composite video input only 12
Satellite tuner
With digital audio output
a)
6–7
With analog audio output only
c)
6–7
VCR
With digital audio output
a)
6
With analog audio output
c)
6
CD/Super Audio CD player
With digital audio output
a)
8
With multi-channel audio output
b)
9
With analog audio output only
c)
11
MD/DAT deck
With digital audio output
a)
8
With analog audio output only
c)
11
Tape deck, Analog disc turntable, tuner 11
Multi-channel decoder 9
Video camera, video game, etc. 12