8
Input signal flexibility
Four option slots are available to increase the flexibility of
the SRX-R110 and the SRX-R105 by using three types of
option boards that connect to different types of signal
formats.
Four input boards can be accommodated simultaneously in
the side panel of the projector. You can select the screen
mode from single, dual, and quad mode, and assign the
appropriate signal board to each quadrant.
•The LKRI-001 Analog Input Board utilizes 5 BNC
connectors that can accept 0.7 volt analog signal levels.
•The LKRI-002 HD-SDI (4:2:2) Input Board can accept
SMPTE 259M SD digital 525 or 625 line video.
It can auto switch to either SMPTE 292M 1080 4:2:2 YUV
serial picture data or SMPTE 372M 4:2:2 RGB serial picture
data.
•The LKRI-003 Dual-link HD-SDI Input Board can accept
any of the following signals: SMPTE 372M dual-link
HD-SDI (4:4:4), SMPTE 292M HD-SDI (4:2:2), dual-link
DC-SDI (RGB 4:4:4), or DC-SDI (YPbPr 4:2:2).
With four LKRI-003 boards, the SRX-R110 or SRX-R105
can project 4096 x 2160 4k images.
Simple remote controller unit
The supplied remote controller unit is
provided to perform various simple
controls of the projectors such as
turning on/off lamp power, adjusting
zoom/focus and lens shift
control.
Four option slots
LKRI-001
Analog Input Board
LKRI-002
HD-SDI (4:2:2) Input Board
LKRI-003
Dual-link HD-SDI Input Board
