10
Pin assignments of D-sub 15-pin to
interconnect SXA-J750 Wired Monitor
Units
The table below shows the pin assignments to connect
the SXA-J750 with the next SXA-J750.
Pin No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Signal
MIC
ORG
CH1
CH2
P.GND
D.GND
DTO + OUT
DTO – OUT
CH3
CH4
CH5
CH6
+24 V
CKO + OUT
CKO – OUT
Type and color of the core cable
N.C
Shielded cable, Brown
Shielded cable, Orange
Shielded cable, Red
Shield of the brown shielded cable
Vinyl cable, Black
N.C
N.C
N.C
Shielded cable, Yellow
Shielded cable, Blue
Shielded cable, Gray
Shielded cable, Purple
Shielded cables, Red, brown and
orange
N.C
N.C
Pin assignments to connect the interface
unit with the joint box
• To connect the SXA-J751 Joint Box with the next
SXA-J751: CN4
n
CN3
• To connect the SXA-J750 Wired Monitor Unit with
the SXA-J751 Joint Box: TM1 and 2
n
CN3
The following core cables of the 7-613-001-61
shielded cable with 16 core cables are not used. Cut
those cables at the shield.
• Shielded cable, White
• Twisted cables, Yellow, gray, white and black
The LINE IN connector (D-sub 15-pin) of the SXA-
J750 is male and the LINE OUT connector (D-sub 15-
pin) is female.
Pin No.
TM1-1
TM1-2
TM1-3
TM1-4
TM1-5
TM1-6
TM2-1
TM2-2
TM2-3
TM2-4
Square 14-pin
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Signal
24 V
24 V
24 V
24 V
ORG
GND
CH1
CH2
CH3
CH4
CH5
CH6
GND
GND
Type and color of the
core cable
Vinyl cables, Red and
orange
Vinyl cable, Brown
Twisted cable, Yellow
Twisted cables, Gray
and white
Twisted cable, Black
Shielded cable, Brown
Shield of the brown
shielded cable
Shielded cable, Orange
Shielded cable, Red
Shielded cable, Yellow
Shielded cable, Blue
Shielded cable, Gray
Shielded cable, Purple
Shield of the gray
shielded cable
Vinyl cable, Black
Use the 7-613-001-61 shielded cable with 16 core
cables.
Cut the white shielded core cable at the shield. This
core cable is not used.
Setting Up the System
