3. Select [Name].
An on-screen keyboard appears on the TV screen.
4. Press
/
/
/
and
to select characters one by one to enter the name.
5. Select [Enter].
The name you entered is registered.
[62] Adjusting Settings
Speaker Setup
Performing automatic calibration (Auto Calibration)
You can perform automatic calibration from where you are sitting.
1. Select [Setup] - [Speaker Setup] from the home menu.
2. Select [Auto Calibration].
3. Follow the instructions on the TV screen, then press
to select [Start].
The measurement starts in 5 seconds.
The measurement process will take approximately 30 seconds with a test tone.
When the measurement ends, a beep sounds and the screen switches.
4. Select the item you want.
Save:
Saves the measurement results and exits the setting process.
Retry:
Performs the Auto Calibration again.
Discard:
Exits the setting process without saving the measurement results.
For details on the measurement results, see “Checking Auto Calibration results.”
5. Save the measurement results.
Select [Save] in step 4.
Calibration Matching
When Auto Calibration is executed, this function works automatically, matching the distance
and level of the right and left speakers. You can set this function only after the D.C.A.C.
measurement process has been completed and the results of the D.C.A.C. measurement
are saved. The setting is valid until you change it.
Note
