Sony STR-ZA1000ES User Manual Download

Page: 175 / 187

Note

Depending on the characteristics of the subwoofer you are using, the setup distance

value may be different from the actual position.

Selecting the front speakers

You can select the front speakers you want to operate.

Be sure to use the buttons on the receiver to perform this operation.

1. Press SPEAKERS on the receiver repeatedly to select the front speaker system you

want to operate.

The indicators on the display panel shows which set of terminals are selected.

SP A :

Speakers connected to the SPEAKERS FRONT A terminals.

SP B

(*1)

Speakers connected to the SPEAKERS SURROUND BACK/FRONT HIGH/FRONT B/BI-

AMP/ZONE 2 terminals.

SP AB

(*1)

Speakers connected to both the SPEAKERS FRONT A and SPEAKERS SURROUND

BACK/FRONT HIGH/FRONT B/BI-AMP/ZONE 2 terminals (parallel connection).

(None):

[SPEAKERS OFF] appears on the display panel. No audio signals are output from any

speaker terminals, or the PRE OUT (*2) jacks.

To select [SP B] or [SP AB], set the assignment for the SPEAKERS SURROUND BACK/FRONT

HIGH/FRONT B/BI-AMP/ZONE 2 terminals to [Front B] by using [SB Speaker Assign] in the Speaker

Setup menu.

The PRE OUT jacks are only for STR-ZA3000ES.

Summary of Contents for STR-ZA1000ES




























































































































































































Search results

Summary of Contents for STR-ZA1000ES

Reviews:

Related manuals for STR-ZA1000ES

Brands by name

Popular brands

Sony STR-ZA1000ES, User Manual

Search results

Summary of Contents for STR-ZA1000ES

Reviews:

Related manuals for STR-ZA1000ES

Brands by name

Popular brands