Sony STR-DN1060 Parts And Controls Download Page 171

Page: 171 / 232

Icon

You can set the icon displayed on the Watch/Listen menu.

Name

You can change the name displayed on the Watch/Listen menu.

Watch / Listen

You can set whether an input is displayed on the Watch menu or the Listen menu.

Watch:

Displays an input to the Watch menu.

Listen:

Displays an input to the Listen menu.

Watch / Listen:

Displays an input to both the Watch and Listen menus.

Show / Hide

You can set whether or not an input is displayed.

Show:

Shows the input.

Hide:

Hides the input.

OPTICAL / COAXIAL

You can set the digital audio input jack(s) assigned to each input.

OPT 1

OPT 2

COAX

None

COMPONENT (for STR-DN1060 only)

You can set the video input jack(s) assigned to each input.

None

Input Mode

You can set the input mode for each input.

Auto

Optical

Coaxial

Analog

[182] Adjusting Settings

Input Settings

Changing the name for each input (Name)

Summary of Contents for STR-DN1060









































































































































































































































Search results

Summary of Contents for STR-DN1060

Reviews:

Related manuals for STR-DN1060

Brands by name

Popular brands

Sony STR-DN1060, Parts And Controls

Search results

Summary of Contents for STR-DN1060

Reviews:

Related manuals for STR-DN1060

Brands by name

Popular brands