Sony STR-DN1010 - Multi Channel Av Receiver Operating Instructions Manual Download Page 8

Page: 8 / 136

D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB01COV_STR-DN1010-CELTOC.fm

masterpage: Left

STR-DN1010

4-174-068-

(1)

Supplied accessories

• Operating Instructions (this manual)
• Quick Setup Guide
• GUI Menu List
• FM wire antenna (aerial) (1)

• AM loop antenna (aerial) (1)

• Remote commander (1)

– RM-AAP051 (Models of area code U2,

CA2 only)

– RM-AAP052 (Models of area code ECE,

CEK, AU1, TW2 only)

• R6 (size-AA) batteries (2)

• Optimizer microphone (ECM-AC2) (1)

Insert two R6 (size-AA) batteries in the

RM-AAP051 (Models of area code U2, CA2
only) or RM-AAP052 (Models of area code
CEK, ECE, AU1, TW2 only) Remote
Commander.
Observe the correct polarity when installing
batteries.

Notes

• Do not leave the remote in an extremely hot or

humid place.

• Do not use a new battery with old ones.
• Do not mix manganese batteries and other kinds of

batteries.

• Do not expose the remote sensor to direct sunlight

or lighting apparatuses. Doing so may cause a
malfunction.

• If you do not intend to use the remote for an

extended period of time, remove the batteries to
avoid possible damage from battery leakage and
corrosion.

• When you replace the batteries, the programmed

remote codes may be cleared. If this happens,
program the remote codes again (page 112).

• When the remote no longer operates the receiver,

replace all the batteries with new ones.

Inserting batteries into the
remote

Summary of Contents for STR-DN1010 - Multi Channel Av Receiver









































































































































Search results

Summary of Contents for STR-DN1010 - Multi Channel Av Receiver

Reviews:

Related manuals for STR-DN1010 - Multi Channel Av Receiver

Brands by name

Popular brands

Sony STR-DN1010 - Multi Channel Av Receiver, Operating Instructions Manual

Search results

Summary of Contents for STR-DN1010 - Multi Channel Av Receiver

Reviews:

Related manuals for STR-DN1010 - Multi Channel Av Receiver

Brands by name

Popular brands