manualshive.com logo in svg

Sony STR-DH520, Operating Instructions Manual

Share
Download
Sony STR-DH520 Operating Instructions Manual Download Page 44

44

GB

D:\NORM'S JOB\SONY HA\SO0109\STR-DH520\4263361111_GB\GB06ENJ_STR-DH520-U2.fm

masterpage: Left

STR-DH520

4-263-361-

11

(1)

x

HD-D.C.S. (HD Digital Cinema 
Sound)

This mode is Sony’s new innovative home 
theater technology using the latest acoustic 
and digital signal processing technologies. It is 
based on precise response measurement data 
of a mastering studio.
With this mode, you are able to enjoy Blu-ray 
and DVD movies at home with not only the 
high quality of sound, but also the best sound 
ambience, just as the movie’s sound engineer 
intended in the mastering process.
You can select the effect type for HD-D.C.S. 
(page 58).

x

PLII MV (Pro Logic II Movie)

Performs Dolby Pro Logic II Movie mode 
decoding. This setting is ideal for movies 
encoded in Dolby Surround. In addition, this 
mode can reproduce sound in 5.1 channel for 
watching videos of overdubbed or old movies.

x

PLIIX MV (Pro Logic IIx Movie)

Performs Dolby Pro Logic IIx Movie mode 
decoding. This setting expands Dolby Pro 
Logic II Movie or Dolby Digital 5.1 to discrete 
7.1 movie channels.

x

PLIIZ (Pro Logic IIz) 

Performs Dolby Pro Logic IIz mode decoding. 
This setting increases flexibility to expand a 
5.1 to a 7.1 channel system. Its vertical 
equipment gives a dimension of presence and 
depth.

x

NEO6 CIN (Neo:6 Cinema) 

Performs DTS Neo:6 Cinema mode decoding. 
A source recorded in 2 channel format is 
decoded into 7 channels.

You can take advantage of surround sound 
simply by selecting one of the receiver’s pre-
programmed sound fields. They bring the 
exciting and powerful sound of concert halls 
into your home.

x

HALL (Hall) 

Reproduces the acoustics of a classical concert 
hall.

x

JAZZ (Jazz Club) 

Reproduces the acoustics of a jazz club.

x

CONCERT (Concert) 

Reproduces the acoustics of a 300-seat live 
house.

x

STADIUM (Stadium) 

Reproduces the feeling of a large open-air 
stadium.

x

SPORTS (Sports) 

Reproduces the feeling of sports broadcasting.

x

P. AUDIO (Portable Audio 
Enhancer) 

Reproduces a clear enhanced sound image 
from your portable audio device. This mode is 
ideal for MP3 and other compressed music.

x

PLII MS (Pro Logic II Music) 

Perform Dolby Pro Logic II Music mode 
decoding. This setting is ideal for normal 
stereo sources such as CDs.

x

PLIIX MS (Pro Logic IIx Music) 

Performs Dolby Pro Logic IIx Music mode 
decoding. This setting is ideal for normal 
stereo sources such as CDs.

x

PLIIZ (Pro Logic IIz) 

Performs Dolby Pro Logic IIz mode decoding. 
This setting increases flexibility to expand a 
5.1 to a 7.1 channel system. Its vertical 
equipment gives a dimension of presence and 
depth.

x

NEO6 MUS (Neo:6 Music)

Performs DTS Neo:6 Music mode decoding. 
A source recorded in 2 channel format is 
decoded into 7 channels. This setting is ideal 
for normal stereo sources such as CDs.

Music mode

Summary of Contents for STR-DH520









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands