Sony STR-DH190, Operating Instructions Manual

Page: 37 / 44

37 GB
D:\NORM'S JOB\SONY HA\SO17_STR-DH190_PMRF1\STR-DH190 (PMRF
01)\4726907121_GB\080TRU.fm
masterpage: Right
STR-DH190
4-726-907- 12 (1)
T
ro
u
bleshoo
ting/Spe
c
if
ic
a
ti
o
ns
Specifications
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
(USA models only)
With 8 ohm loads, both channels driven,
from 20 Hz – 20,000 Hz; rated 90 watts per
channel minimum RMS power at stereo
mode, with no more than 0.09% total
harmonic distortion from 250 milliwatts to
rated output.
Amplifier section
1)
Speaker impedance use
6 ohms – 16 ohms
Impedance of A/B speakers and its
corresponding speaker impedance setting
Minimum RMS Output Power
(8 ohms, 20 Hz – 20 kHz, THD 0.09%)
90 W + 90 W
Stereo Mode Output Power
(8 ohms, 1 kHz, THD 1%)
100 W + 100 W
1)
Measured under the following conditions:
Frequency response
Analog
10 Hz – 100 kHz, +0.5/–2 dB (with
BASS = 0 dB, TREBLE = 0 dB)
Input (Analog)
PHONO IN
For MM type cartridge
Equalizer RIAA; +/–1 dB
S/N
2)
: 80 dB (A – Weighted network)
PORTABLE IN
Sensitivity: 500 mV/50 kilohms
S/N
2)
: 90 dB (A – Weighted network)
AUDIO IN
Sensitivity: 500 mV/50 kilohms
S/N
2)
: 96 dB (A – Weighted network)
Output (Analog)
AUDIO OUT
Voltage: 500 mV/1 kilohm
Tone
Gain levels
±10 dB, 1 dB step
2)
Input short with BASS = 0 dB, TREBLE = 0 dB.
FM tuner section
Tuning range
USA and Canadian models:
87.5 MHz – 108.0 MHz (100 kHz step)
Other models:
87.5 MHz – 108.0 MHz (50 kHz step)
Antenna (aerial)
FM wire antenna (aerial)
Antenna (aerial) terminals
75 ohms, unbalanced
Service section
Output voltage
DC 5 V
Maximum current
200 mA
BLUETOOTH section
Communication system
BLUETOOTH Specification version 4.2
Output
BLUETOOTH Specification Power Class 1
Maximum communication range
Line of sight approx. 30 m (98.4 feet)
1)
Frequency band
2.4 GHz band
Modulation method
FHSS (Freq Hopping Spread Spectrum)
Compatible BLUETOOTH profiles
2)
A2DP 1.2 (Advanced Audio Distribution
Profile)
AVRCP 1.6 (Audio Video Remote Control
Profile)
Supported Codecs
3)
SBC
4)
, AAC
Transmission range (A2DP)
20 Hz – 20,000 Hz (Sampling frequency
44.1 kHz)
Speaker
system
Speaker impedance
setting (page 19)
“6 OHM” “8 OHM”
A or B
6 ohms –
16 ohms 8 ohms –
16 ohms
A and B
12 ohms –
16 ohms
> 16 ohms
Area Power requirements
USA, Canada,
Taiwan
120 V AC, 60 Hz
Oceania, Europe 230 V AC, 50 Hz