STR-DH130
7
SECTION 2
TEST MODE
[AM CHANNEL STEP 9 kHz/10 kHz SELECTION MODE]
(US, Canadian model only)
* Either the 9 kHz step or 10 kHz step can be selected for the AM
channel step.
* Procedure:
1. While pressing the [TUNING MODE] button, press the
[
?/1
] button to turn on the main power.
2. The message “9K STEP” or “10K STEP” appears for a
moment
and the channel step is changed.
[SOFTWARE VERSION DISPLAY MODE]
* The software version is displayed.
* Procedure:
1. While pressing the [SPEAKERS (OFF/A/B/A+B)] and the
[MUTING] buttons simultaneously, press the [
?/1
] button to
turn on the main power.
2. The destination and the software version are displayed.
Destination
D1
D2
D3
VERSION
UNKNOWN
U
N
K
U2
U
2
1.
0
5
A
CA2
C
A
2
2.
0
5
A
CEL
C
E
L
3.
0
5
A
[KEY CHECK MODE]
* Button check
* Procedure:
1. While pressing the [SPEAKERS (OFF/A/B/A+B)] and the
[DIMMER] buttons simultaneously, press the [
?/1
] button to
turn on the main power.
2. The message “REST 13” appears.
3. Every press of any button other than the [
?/1
] counts down
the buttons. The buttons which are already counted once are
not counted again. When all buttons are pressed “REST 00”
appears.
[VACUUM FLUORESCENT DISPLAY TEST MODE]
* All
fl
uorescent segments are tested. When this test is activated,
all segments light on at the same time, then each segment lights
on one after another.
* Procedure:
While pressing the [SPEAKER (OFF/A/B/A+B)] and the
[DISPLAY] buttons simultaneously, press the [
?/1
] button to
turn on the main power.
1. ALL segments light on.
2. Turn the [INPUT SELECTOR] control, con
fi
rm display.
3. Turn the [INPUT SELECTOR] control, con
fi
rm display.
4. Turn the [INPUT SELECTOR] control, all segments light off.
[HISTORY MODE]
* The state that the set is used is memorized.
* Procedure:
1. While pressing the [] and [SPEAKERS (OFF/A/
B/A+B)] buttons, press the [
?/1
] button to turn on the power
and “HISTORY” is displayed.
2. Each time the [
]/[
] buttons on the remote commander is
pressed, the item is switched in order as follows.
Item
Display
History HISTORY
Count how many time of
protector happen
COUNT xx
Total single power on time
xxxxxHxx01
Input function
FUNCTION
HP ON/OFF
HP xxx
Volume
VOL xxx
Bass BASS
xxx
Treble TREB
xxx
Balance
F xxx
Total power on time
xxxxxHxx02
Muting MUTE
xxx
Power on counter
(Rebox Test Mode)
REBXxxxx
Protector Type
PROTxxxx
VACS step
VACS xx
Return to history
HISTORY
[PROTECTOR AUTO OFF]
* To disable auto off after protector occur
* Procedure:
1. While pressing the [TREBLE -] and [SPEAKERS (OFF/A/B/
A+B)] buttons, press the [
?/1
] button to turn on the main
power.
2. “PROT OFF” appears and switch off the set.
[SHIPMENT MODE]
* All preset contents are reset to the default setting.
* Procedure:
1. While pressing the [TUNING MODE] and the [MUTING]
buttons simultaneously, press the [
?/1
] button to turn on the
main
power.
2. “CLEARING” and “CLEARED” appear and switch off the
set.
L
R
S
LFE
NEO:6
COAX S-AIR
-ES
x
PL
ZONE 2
EX
ST
SAT
k
ft.
MHz
MEMORY
SP B
C
SW
SL
SR
SBL SB SBR
SP A
DTS
II
RDS
CAT
96/24
MONO SLEEP
D
D.RANGE
OPT
dB
Hz
m
HDMI
L
R
S
LFE
NEO:6
COAX S-AIR
-ES
x
PL
ZONE 2
EX
ST
SAT
k
ft.
MHz
MEMORY
SP B
SW
SL
SR
SBL SB SBR
SP A
DTS
II
RDS
CAT
96/24
MONO SLEEP
D
D.RANGE
OPT
dB
Hz
m
C
HDMI
