IMPORTANT: This will also happen even when the Auto Format Decode (AFD) feature is
selected.
The
sound level
of the rear speakers will be automatically adjusted according to your
configuration, maintaining an adequate sound balance between all of your speakers.
NOTE
: This feature will not apply when audio in Direct-Stream-Digital (DSD) format is being
played, for example if you are listening to a Super Audio CD (SACD).
Sound of Bluetooth headphones/speakers
cuts or noise occurs
Various reasons can cause noise interference to the sound of Bluetooth headphones or speakers.
Please check the following solutions for each cause:
Alternatively, you can visit our
Sony Headphones Troubleshooting Guide
Reasons
Workarounds
C
as
e
1
When using the Bluetooth device close to Wi-Fi
routers, personal computers, microwave ovens,
refrigerators, etc.
Wi-Fi routers, personal computers, microwave ovens,
refrigerators, etc. are devices that emit radio waves.
Bluetooth devices may be affected by these radio
waves when using them in a location with a mixture of
multiple radio waves.
Please use the Bluetooth device
away from Wi-Fi routers, personal
computers, microwave ovens,
refrigerators, etc. in order to avoid
radio wave interference.
If you use a headphone set with a
noise canceling function, turn the
noise canceling function off.
