2
STR-DE697
Models of area code AUS
Rated Power Output at Stereo Mode
(8 ohms 20 Hz – 20 kHz, THD 0.09 %)
80 W + 80 W
1)
(8 ohms 1 kHz, THD 0.7 %)
100 W + 100 W
1)
Reference Power Output
1)
(8 ohms 20 Hz – 20 kHz, THD 0.09 %)
FRONT
2)
: 80 W/ch
CENTER
2)
: 80 W
SURR
2)
: 80 W/ch
SURR BACK
2)
: 80 W/ch
(8 ohms 1 kHz, THD 0.7 %)
FRONT
2)
: 100 W/ch
CENTER
2)
: 100 W
SURR
2)
: 100 W/ch
SURR BACK
2)
: 100 W/ch
(8 ohms 1 kHz, THD 10 %)
FRONT
2)
: 120 W/ch
CENTER
2)
: 120 W
SURR
2)
: 120 W/ch
SURR BACK
2)
: 120 W/ch
1) Measured under the following conditions:
Area code
Power requirements
US, CND
120 V AC, 60 Hz
AEP, UK, SP, MY
230 V AC, 50 Hz
AUS
240 V AC, 50 Hz
2) Depending on the sound field settings and the
source, there may be no sound output.
Frequency response
MULTI CH IN, SA-CD/
10 Hz – 70 kHz
CD, MD/TAPE, DVD,
+0.5/–2 dB (with sound
AUX, VIDEO 1, 2, 3
field and equalizer
bypassed)
Inputs (Analog)
MULTI CH IN, SA-CD/
Sensitivity: 500 mV
CD, MD/TAPE, DVD,
Impedance: 50 kiloohms
AUX, VIDEO 1, 2, 3
S/N
3)
: 96 dB
(A, 500 mV
4)
)
3) INPUT SHORT (with sound field and equalizer
bypassed).
4) Weighted network, input level.
Inputs (Digital)
DVD, SA-CD/CD
Sensitivity: –
(Coaxial)
Impedance: 75 ohms
S/N: 100 dB
(A, 20 kHz LPF)
VIDEO 2, MD/TAPE,
Sensitivity: –
SA-CD/CD (Optical)
Impedance: –
S/N: 100 dB
(A, 20 kHz LPF)
Outputs (Analog)
MD/TAPE (OUT),
Voltage: 500 mV
VIDEO 1 (AUDIO OUT)
Impedance: 10 kiloohms
SUB WOOFER
Voltage: 2 V
Impedance: 1 kiloohms
Outputs (Digital)
MD/TAPE (Optical)
Sensitivity: –
EQ
Gain levels
±
6 dB, 1 dB step
FM tuner section
Tuning range
87.5 – 108.0 MHz
Antenna
FM wire antenna
Antenna terminals
75 ohms, unbalanced
Intermediate frequency
10.7 MHz
Sensitivity
Mono:
18.3 dBf, 2.2
µ
V/75 ohms
Stereo:
38.3 dBf, 22.5
µ
V/75 ohms
Useable sensitivity
11.2 dBf, 1
µ
V/75 ohms
S/N
Mono:
76 dB
Stereo:
70 dB
Harmonic distortion at 1 kHz
Mono:
0.3%
Stereo:
0.5%
Separation
45 dB at 1 kHz
Frequency response
30 Hz – 15 kHz,
+0.5/–2 dB
Selectivity
60 dB at 400 kHz
AM tuner section
Tuning range
Models of area code US, CND
With 10-kHz tuning scale: 530 – 1,710 kHz
5)
With 9-kHz tuning scale: 531 – 1,710 kHz
5)
Models of area code AEP, UK, AUS, SP, MY
With 9-kHz tuning scale: 531 – 1,602 kHz
Antenna
Loop antenna
Intermediate frequency
450 kHz
Usable sensitivity
50 dB/m (at 1,000 kHz or
999 kHz)
S/N
54 dB (at 50 mV/m)
Harmonic distortion
0.5 % (50 mV/m, 400 Hz)
Selectivity
At 9 kHz:
35 dB
At 10 kHz:
40 dB
5) You can change the AM tuning scale to 9 kHz or 10 kHz.
After tuning in any AM station, turn off the receiver. While
holding down PRESET or , press
?/1
. All preset stations will be erased when you change
the tuning scale. To reset the scale to 10 kHz (or 9 kHz),
repeat the procedure.
