O
ther O
p
e
ratio
ns
masterpage:Right
lename[E:\SEM_Janet\Data_DB895D\J9050665_2598514111DB895DCEL\2598514111\GB07
TH_STR-DB895D-CEL.fm]
47
GB
model name1[STR-DB895D]
[2-598-514-
11
(1)]
You can enter a name of up to 8 characters for
preset stations and inputs selected with INPUT
SELECTOR, and display it in the receiver’s
display.
Use the buttons on the receiver for the operation.
To index a preset station
1
Turn INPUT SELECTOR to select the
FM or AM band, then tune in the preset
station you want to create an index
name for (page 28).
2
Press MAIN MENU repeatedly to select
“TUNER”.
3
Turn MENU to select “NAME IN”.
4
Press MEMORY/ENTER.
The cursor flashes and you can select a
character. Follow the procedure of “To
create an index name”.
To index an input
1
Turn INPUT SELECTOR to select the
input you want to create an index name
for.
2
Press MAIN MENU repeatedly to select
“CUSTOM”.
3
Turn MENU to select “NAME IN”.
4
Press MEMORY/ENTER.
The cursor flashes and you can select a
character. Follow the procedure of “To
create an index name”.
To create an index name
1
Use MENU and –/+ to create an index
name.
Turn –/+ to select a character, then turn
MENU to move the cursor to the next
position.
Tips
• You can select the character type as follows by
turning –/+.
Alphabet (upper case)
t
Numbers
t
Symbols
• To enter a blank space, turn –/+ until a blank
space appears in the display.
• If you made a mistake, turn MENU until the
character you want to change flashes, then turn
–/+ to select the correct character.
2
Press MEMORY/ENTER to store the
index name.
Notes
• When you name an RDS station and tune in the
station, the Program Service name appears instead of
the name you entered. (You cannot change the name
of a Program Service name. The name you entered
will be overwritten by the Program Service name.)
• You cannot name DAB stations. The service
component label appears when you tune in DAB
stations.
Other Operations
Naming preset stations
and inputs
GB01COV_STR-DB895D-CEL.book Page 47 Wednesday, June 15, 2005 9:28 AM
