![background image](http://html.mh-extra.com/html/sony/str-da2es-fm-stereo-fm-am-receiver/str-da2es-fm-stereo-fm-am-receiver_service-manual_413763001.webp)
SERVICE MANUAL
FM STEREO FM-AM RECEIVER
SPECIFICATIONS
STR-DA2ES/DB1080
Photo: STR-DA2ES
Ver 1.1 2003.07
9-874-061-02
Sony Corporation
2003G05-1
Home Audio Company
C
2003.07
Published by Sony Engineering Corporation
US Model
Canadian Model
STR-DA2ES
AEP Model
UK Model
E Model
STR-DB1080
– Continued on next page –
This receiver incorporates Dolby* Digital and Pro Logic Surround
and the DTS** Digital Surround System.
* Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic” and the double-D symbol are
trademarks of Dolby Laboratories.
** “DTS”, “DTS-ES Extended Surround” and “Neo:6” are
trademarks of Digital Theater Systems, Inc.
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
(Models of area code U only)
With 8 ohm loads, both channels driven, from
20 – 20,000 Hz; rated 100 watts per channel
minimum RMS power, with no more than
0.09 % total harmonic distortion from
250 milliwatts to rated output.
Amplifier section
POWER OUTPUT
Models of area code U, CA
Rated Power Output at Stereo Mode
(8 ohms 20 Hz – 20 kHz, THD 0.09 %)
100 W + 100 W
(4 ohms 20 Hz – 20 kHz, THD 0.09 %)
80 W + 80 W
Reference Power Output
(8 ohms 20 Hz – 20 kHz, THD 0.09 %)
FRONT
1)
:100 W + 100 W
CENTER
1)
: 100 W
SURR
1)
: 100 W + 100 W
SURR BACK
1)
: 100 W
(4 ohms 20 Hz – 20 kHz, THD 0.09 %)
FRONT:
1)
80 W + 80 W
CENTER
1)
: 80 W
SURR
1)
: 80 W + 80 W
SURR BACK
1)
: 80 W
Models of other area code
Rated Power Output at Stereo Mode
(8 ohms 1 kHz, THD 0.7 %)
100 W + 100 W
2)
(4 ohms 1 kHz, THD 0.7 %)
90 W + 90 W
2)
Reference Power Output
2)
(8 ohms 1 kHz, THD 0.7 %)
FRONT
1)
: 100 W + 100 W
CENTER
1)
: 100 W
SURR
1)
: 100 W + 100 W
SURR BACK
1)
: 100 W
(4 ohms 1 kHz, THD 0.7 %)
FRONT
1)
: 90 W + 90 W
CENTER
1)
: 90 W
SURR
1)
: 90 W + 90 W
SURR BACK
1)
: 90 W
(8 ohms 20 Hz – 20 kHz, THD 0.09 %)
FRONT
1)
: 90 W + 90 W
CENTER
1)
: 90 W
SURR
1)
: 90 W + 90 W
SURR BACK
1)
: 90 W
(4 ohms 20 Hz – 20 kHz, THD 0.09 %)
FRONT
1)
: 80 W + 80 W
CENTER
1)
: 80 W
SURR
1)
: 80 W + 80 W
SURR BACK
1)
: 80 W
1) Depending on the sound field settings and the
source, there may be no sound output.
2) Measured under the following conditions:
Area code
Power requirements
E
240 V AC, 50 Hz
SP, CEL, CEK, KR
230 V AC, 50 Hz
Frequency response
PHONO
CD/SACD, TAPE,
MD/DAT, TV/SAT,
DVD/LD, VIDEO 1, 2,
3
Inputs (Analog)
PHONO
MULTI CH IN 1, 2,
CD/SACD, TAPE,
MD/DAT, DVD/LD,
TV/SAT, VIDEO 1, 2,
3
3) INPUT SHORT.
4) Weighted network, input level.
RIAA equalization curve
±
0.5 dB
10 Hz – 100 kHz
+0.5/–2 dB (when
ANALOG DIRECT is
selected)
Sensitivity: 2.5 mV
Impedance: 50 kilohms
S/N
3)
: 86 dB (A, 2.5 mV
4)
)
Sensitivity: 150 mV
Impedance: 50 kilohms
S/N
3)
: 96 dB
(A, 150 mV
4)
)