STR-DA1500ES
12
SECTION 3
TEST MODE
AM CHANNEL STEP 9 kHz/10 kHz SELECTION MODE
(US, Canadian model only)
* Either the 9 kHz step or 10 kHz step can be selected for the AM
channel step.
* Procedure:
1. While depressing the [FM/AM] button, press the [
?/1
] button
to turn on the main power.
2. Either the message “9K STEP” or “10K STEP” appears for a
moment and select the desired step.
VACUUM FLUORESCENT DISPLAY TEST MODE
* All
fl
uorescent segments are tested.
When this test is activated, all segments light on at the same time,
then each segment lights on one after another.
* Procedure:
While depressing the [TUNING MODE] and the [DIMMER]
buttons simultaneously, press the [
?/1
] button to turn on the
main power.
1. ALL segments light on.
2. Press the [DISPLAY] button, con
fi
rm display.
3. Press the [DISPLAY] button, con
fi
rm display.
4. Press the [DISPLAY] button, all segments light off.
power.
2. The model name, destination and the software version are dis
KEY CHECK MODE
* Button check
* Procedure:
1. While depressing the [FM/AM] and the [MUTING] buttons
simultaneously, press the [
?/1
] button to turn on the main
power.
2. Either the message “REST 11” appears.
3. Every pressing of any button other than the [
?/1
] counts down
the buttons. The buttons which are already counted once are
not counted again. When all buttons are pressed “REST 00”
appears.
SHIPMENT MODE
All preset contents are reset to the default setting.
* Procedure:
1. While depressing the [FM/AM] and the [SLEEP] buttons
simultaneously, press the power [
?/1
] button to turn on the
main power.
2. “CLEARING” appears for a while,“CLEARED” appears and
switch off the set.
HISTORY MODE
The state that the set is used is memorized.
* Procedure:
1. While pressing the [MEMORY/ENTER] and [DIMMER]
buttons, press the power [
?/1
] button to turn on the power
and “HISTORY” is displayed.
2. Each time the [
↑
]/[
↓
] buttons on the remote commander is
pressed, the item is swithed in order as follows.
Item
Display
History
HISTORY
Count has many time
protector happen
COUNT xx
Total single power on time
SxxxHxxM
Input function
FUNCTION
HP ON/OFF
HP xxx
Volume
VOLxxxxx
Bass
BASS xxx
Treble
TREB xxx
Level information
Fx xxx
Total power on time
TxxxHxxM
Muting
MUTE xxx
Power on counter
(Rebox test mode)
RB xxxxx
Return to history
HISTORY
PROTECTOR AUTO OFF
* Procedure:
1. While pressing the [TONE ON/OFF] and [SPEAKERS
(OFF/A/B/A+B)] buttons, press the power [
?/1
] button to
turn on the main power.
2. “PROTECT” appears and switch off the set.
XM FACTORY TEST MODE
* Mode to con
fi
rm operation of XM. Doing display of ID of XM
antenna and output of audio signal that XM antenna generates,
it is con
fi
rmed that there are no problems in the communication
of the XM antenna and the transmission of the audio signal.
* Procedure:
1. The XM antenna was connected, while pressing the [FM-
MODE] and [DIMMER] buttons, press the [
?/1
] button to
turn on the main power.
2. Whenver the [DISPLAY] button is pressed, the output of the
audio signal of 1kHz L/R, 20 Hz L/R, 5kHz L/R, muting, 1
kHz L and 1kHz R are switched.
L
SW
C
R
SL
S
SR
SBL SB SBR
LFE
SP A
NEO:6
COAX
HDMI
S-AIR
DTS -ES
x
II
PL
RDS
CAT
96/24
MONO
ZONE 2
SLEEP
DEX
ST
D
D.RANGE
SAT
D D
D
OPT
dB
Hz
k
ft.
m
MHz
MEMORY
SP B
L
R
S
LFE
NEO:6
S-AIR
II
D
D.RANGE
SLEPP
k
m
MHz
SP B
D D
D D
SW
C
SL
SR
SBL SB SBR
DTS
CAT
RDS
ZONE2
PL X
ST
EX
OPT
dB
Hz
ft.
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
