Chapter 2 Preparation
15
Option Switches (DIP Switch)
Remove the two slotted screws by using a slotted screwdriver. Remove the
access cover to change the DIP switch settings. (Refer to the following
figure for details changing the DIP switch settings.)
After changing the DIP switch settings, replace access cover and tighten the
two slotted screws using a slotted screwdriver.
CAUTION
Before removing the access cover to change DIP switch settings on the
drive, turn off the computer and disconnect the power cord from the unit.
Once the DIP switch settings have been changed, replace the access cover
using the two original slotted screws provided.
DIP Switch Access
DIP Switch Positions
Default
ON
OFF
1
2
3
4
5
6
7
8
Access Cover
DIP Switch
Slotted
Screws
1
Drive Mode (OFF)
2
Drive Mode (OFF)
3
Drive Mode (OFF)
4
Drive Mode (OFF)
5
Reserved (OFF)
6
Periodic Cleaning Req (OFF)
7
DC Control (1) (ON)
8
DC Control (2) (OFF)
Summary of Contents for StorStation AITe130V-UL
Page 4: ...4 Safety Regulations ...
Page 31: ......
