Sony ST-SA50ES - Am/fm Tuner Operating Instructions Manual Download Page 11

11

Advanced Tuner Operations

Naming Preset Stations

You can assign a name up to 8 characters long to each
preset station. When the station is tuned in, the station
name will appear along with the frequency.

1

Press CHARACTER.
The cursor blinks in the display.

2

Turn TUNING/SELECT to select a character.
See the list below for the characters available.

3

When the character you want appears, press
CHARACTER to move the cursor into position for
the next character.

If you make a mistake

Press CHARACTER repeatedly until the character you
want to change flashes (every time you press
CHARACTER, the next character flashes). Then turn
TUNING/SELECT to select a new character.

4

Repeat steps 2 and 3 until the station name you
desire appears in the display.

5

Press MEMORY.

6

Press SHIFT and one of the preset buttons to
specify the preset where you want to store the
station name.

Note

The display returns to normal display mode if you stop
assigning names for more than 8 seconds. If this happens,
start again from the beginning.

z

To see the frequency of the displayed station name

Press DISPLAY repeatedly.

SHIFT

ENTER

CHARACTER

MEMORY

DISPLAY

TUNING/

SELECT

(space)

Character list

ENTER

MENU

TUNING/

SELECT

Sorting Preset Stations

This tuner's sorting feature lets you arrange your
station presets automatically according to alphabetical
order, signal strength, or tuner band.

1

Press MENU.

2

Turn TUNING/SELECT until “Edit” appears in
the display and press ENTER.
If no stations have been stored as presets, “No
Preset” appears in the display.

3

Turn TUNING/SELECT to choose one of the
following sorting methods:

4

Press ENTER.
The tuner sorts the stations, then returns to
normal tuning mode and receives preset station
A1.

To sort

preset stations in alphabetical order
according to their preset names.
Stations without preset names are arranged
by frequency, from low to high.

preset stations in order of their signal
strength (FM stations only).
AM frequencies are arranged by frequency.

stations in order of their frequency band
(FM - AM).

Choose

Alphabet

Strength

Band

Summary of Contents for ST-SA50ES - Am/fm Tuner

















Reviews: