SS-M20/M20D/M40D/M60D/M80D/WM80D
REVISION HISTORY
Ver.
Date
Description of Revision
1.0
2018.02
New
1.1
2018.05
Addition of Malaysia and Argentina models (SS-M40D/M60D/M80D/WM80D).
Addition of SS-M20D and SS-M20 models.
Add COVER, BRACKET, CUSHION (MONICA), CUSHION (MIRANDA), CUSHION (SW),
CUSHION (CLOTH), RUBBER and TAPE for SS-M60D and SS-M80D models in page 7.
Add CUSHION (MONICA) for SS-M20, SS-M20D and SS-M40D models in page 6.
Add CUSHION (MONICA), CUSHION (MIRANDA), CUSHION (SW) and RUBBER,T for
SS-WM80D model in page 8.
Add one screw of SCREW +BVTP 3X16 TYPE2 IT-3 in page 7.
Add two screws of SCREW +BVTP 3X16 TYPE2 IT-3 in page 8.
Change P/N and description of screw type from SCREW +BVTP 3X10 TYPE2 IT-3 to
SCREW +BVTP 3X16 TYPE2 IT-3 in page 8.
Delete one screw of SCREW +BVTP 3X10 TYPE2 IT-3 in page 7.
How to search for a contact point of signal lines or the like in DIAGRAMS SECTION
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a diff erent page, use
the PDF fi le search function to fi nd one.
e.g.) If a contact point is shown as
, follow the procedure below.
Procedure:
1. Press the [F] key while pressing the [Ctrl] key.
2. Input “>001Z” in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
Note:
If you still see the original page, press the [Enter] key again.
SYS SET
2018/05/25 00:59:48 (GMT+09:00)
