26
2
Tap [Intermission Setup].
The intermission setting screen will be displayed.
3
Set the intermission.
1
Set the position where you want to insert the
intermission.
Using the operation buttons, play back the CPL
and tap [Set Stop Point] at the position you want
to add the intermission. Similarly, tap [Set Restart
Point] where you want to restart playback.
The set time will be entered in
2
[Stop Point] and
[Restart Point].
For an explanation of how to use the control
buttons, see “Playing Back CPL” (page 22).
2
Adjust the time as required.
3
Tap [Select Interval SPL] and select the SPL to
play during the interval period (Interval SPL).
4
Specify the interval period.
5
Using the control buttons, play back the CPL to
confirm intermission operation.
6
Tap [Apply].
The intermission will be set.
Tip
Only one intermission can be set per SPL.
Triggering SPL Playback Using GPI
Signals
You can use a GPI signal as a trigger to start playing back
an SPL.
1
Tap [GPI Triggered] in the [SPL] tab.
The “GPI Triggered” screen will be displayed.
2
Select the GPI signal, and then tap [Edit].
The “Edit GPI-triggered SPL” screen will be
displayed.
3
Specify the duration for which playback is enabled.
1
Select the SPL for which to start playback.
2
Determine the duration for which the playback will
be enabled, and change the start and end dates.
3
Tap [Apply].
Tip
[Details] to display detailed information on the
selected SPL.
Elapsed time
(current position)
1
,
5
3
4
6
2
2
3
1