Sony SRW-9000, Operation Manual

Page: 30 / 207

Mounting the Lens 30
Cha
p
te
r 2
P
rep
ar
at
ions
You can use BATTERY (see page 169) of the
SYSTEM Setup menu to set the battery voltage
threshold values that trigger the END and Near
END warnings.
You can check the power voltage in the subdisplay, in
the viewfinder, and on an external monitor. For
details, see “Checking the Power Voltage and
Selecting the Fan Mode” (page 50) and “Viewing
Settings and Indications in the Viewfinder” (page
60)
For details on the warning tone, see “Warning
System” (page 183).
Use an optional lens that conforms to the B4 (
2
/
3
")
lens mount.
For details on handling the lens, refer to the
operation manual for the lens.
1
Push the lens mount lever up and
remove the lens mount cap from the
lens mount.
2
Align the center pin on the lens with the
notch in the lens mount, and insert the
lens into the mount.
Mounting the Lens
Lens mount lever
60
oo
5.6
8
11
16
CL
2. 8
2
1.6
T
ff
4
30
20
15
12
10
8
7
6
5.6
5
Notch
Lens mount securing rubber